Council Decision (EU) 2016/1315 of 18 July 2016 on the position to be adopted, on behalf of the European Union, within the Association Committee established by the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, as regards a temporary amendment to Protocol 3 to that Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation as a response in favour of the refugees fleeing the conflict in Syria
L 208/6
Official Journal of the European Union
EN
2.8.2016
DECISIONS
COUNCIL DECISION (EU) 2016/1315
of 18 July 2016
on the position to be adopted, on behalf of the European Union, within the Association
Committee established by the Euro-Mediterranean Agreement establishing an Association between
the European Communities and their Member States, of the one part, and the Hashemite Kingdom
of Jordan, of the other part, as regards a temporary amendment to Protocol 3 to that Agreement
concerning the definition of the concept of ‘originating products’ and methods of administrative
cooperation as a response in favour of the refugees fleeing the conflict in Syria
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular the first subparagraph of
Article 207(4), in conjunction with Article 218(9) thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1)
The Euro-Mediterranean Agreement establishing an Association between the European Communities and their
Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part (1) (‘the Agreement’)
entered into force on 1 May 2002. Pursuant to Article 89 of the Agreement, an Association Council was
established to examine any major issues arising within the framework of the Agreement and any other bilateral
or international issues of mutual interest.
(2)
Pursuant to Article 92 of the Agreement, an Association Committee was established with responsibility for the
implementation of the Agreement and to which the Association Council may delegate, in full or in part, any of
its powers.
(3)
Pursuant to Article 94(1) of the Agreement, the Association Committee is to have the power to take decisions for
the management of the Agreement as well as in areas where the Association Council has delegated its powers
to it.
(4)
Pursuant to Article 2 of Council and Commission Decision 2002/357/EC,ECSC (2), the position to be taken by
the Union within the Association Committee is to be laid down by the Council on a proposal by the
Commission.
(5)
Pursuant to Article 39 of Protocol 3 to the Agreement, as amended by Decision No 1/2006 of the EU Jordan
Association Council (3), the Association Committee may decide to amend the provisions of that Protocol.
(6)
The Hashemite Kingdom of Jordan (‘Jordan’) submitted proposals to the international community for a holistic
approach for an economic response to the Syrian refugee crisis.
(1) OJ L 129, 15.5.2002, p. 3.
(2) Council and Commission Decision 2002/357/EC,ECSC of 26 March 2002 on the conclusion of the Euro-Mediterranean Agreement
establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom
of Jordan, of the other part (OJ L 129, 15.5.2002, p. 1).
3
( ) Decision No 1/2006 of the EU-Jordan Association Council of 15 June 2006 amending Protocol 3 to the Euro-Mediterranean Agreement,
concerning the definition of the concept of originating products and methods of administrative cooperation (OJ L 209, 31.7.2006,
p. 30).
2.8.2016
EN
Official Journal of the European Union
L 208/7
(7)
In the framework of the International Conference on Supporting Syria and the Region, held in London on
4 February 2016, Jordan declared its intention to permit Syrian refugees to participate in the formal labour
market in Jordan and set out a number of steps it would take towards that end, in particular with a view to
creating approximately 200 000 job opportunities for Syrian refugees.
(8)
In relation to that initiative, Jordan made a specific request on 12 December 2015 for a temporary relaxation of
the rules of origin to be made available under the Agreement so as to enhance Jordan's exports to the Union and
create additional employment opportunities, especially for Syrian refugees.
(9)
As a result of the examination of Jordan's request, the Council, on behalf of the Union, considers it justified to
agree to additional rules of origin that, under the conditions specified in the Annex to the draft Decision of the
Association Committee attached to this Decision (‘the draft Decision of the Association Committee’), in particular
as regards relevant products, production zones and the creation of additional employment for Syrian refugees,
should be made available as an alternative to those laid down in Annex II to Protocol 3 of the Agreement for
exports from Jordan and should be those applied by the Union to imports from least-developed countries under
the Generalised Scheme of Preferences/Everything But Arms initiative.
(10)
The Annex to the draft Decision of the Association Committee should apply until 31 December 2026 and a midterm review should be undertaken allowing the parties to make adjustments through a decision of the
Association Committee, if necessary.
(11)
The achievement by Jordan of its objective of creating around 200 000 job opportunities for Syrian refugees
would represent a significant milestone also in respect of the implementation of the draft Decision of the
Association Committee. Accordingly, once that objective is achieved, the Union and Jordan will consider further
simplifying the conditions for producers in Jordan to benefit from the Decision of the Association Committee.
(12)
The application of the Annex to the Decision of the Association Committee should be accompanied by
appropriate monitoring and reporting obligations and it should be possible to suspend the application of the
Annex to the Decision of the Association Committee if the conditions for its application are no longer fulfilled or
if the conditions for safeguard measures are met,
HAS ADOPTED THIS DECISION:
Article 1
1.
The position to be adopted on behalf of the European Union in the EU-Jordan Association Committee established
in accordance with Article 92 of the Agreement, as regards a temporary amendment to Protocol 3 to that Agreement
concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation, shall be
based on the draft Decision of that Association Committee, attached to this Decision.
2.
Minor technical corrections to the draft Decision of the Association Committee may be agreed to by the represen
tatives of the Union in the Association Committee without further decision of the Council.
Article 2
After its adoption, the Decision of the Association Committee shall be published in the Official Journal of the European
Union.
L 208/8
EN
Official Journal of the European Union
2.8.2016
Article 3
This Decision shall enter into force on the date of its adoption.
Done at Brussels, 18 July 2016.
For the Council
The President
F. MOGHERINI
2.8.2016
EN
Official Journal of the European Union
L 208/9
DRAFT
DECISION No [1]/2016 OF THE EU-JORDAN ASSOCIATION COMMITTEE
of [x/x/]2016
amending the provisions of Protocol 3 to the Euro-Mediterranean Agreement establishing an
Association between the European Communities and their Member States, of the one part, and the
Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept of
‘originating products’ and the list of working or processing required to be carried out on nonoriginating materials in order for certain categories of products, manufactured in dedicated
development zones and industrial areas, and connected with generating employment for Syrian
refugees and Jordanians, to obtain originating status
THE EU-JORDAN ASSOCIATION COMMITTEE,
Having regard to the Euro-Mediterranean Agreement establishing an Association between the European Communities
and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, (‘the Agreement’),
and in particular Article 94 of the Agreement and Article 39 of Protocol 3 to the Agreement,
Whereas:
(1)
The Hashemite Kingdom of Jordan (‘Jordan’) submitted proposals to the international community for a holistic
approach for an economic response to the Syrian refugee crisis and, as part of this initiative, made a specific
request on 12 December 2015 for a relaxation of the rules of origin applied under the Agreement so as to
enhance Jordan's exports to the Union and create additional employment opportunities, especially for Syrian
refugees as well as Jordanians.
(2)
In the framework of the International Conference on Supporting Syria and the Region, held in London on
4 February 2016, Jordan declared its intention to promote the participation of Syrian refugees in the formal
labour market in Jordan and, in that context, to provide 50,000 job opportunities for Syrian refugees within one
year of the Conference and the overall objective to increase this level to approximately 200 000 job opportunities
over the next years.
(3)
A temporary relaxation of applicable rules of origin would allow for certain goods produced in Jordan to be
subject to less stringent rules of origin for the purpose of determining preferential treatment on import into the
Union than would otherwise apply. This temporary relaxation of applicable rules of origin would be part of the
Union's support to Jordan in the context of the Syrian crisis and with the aim of mitigating the costs imposed by
hosting a large number of Syrian refugees.
(4)
The Union considers that the requested relaxation of the rules of origin would contribute to the overall objective
of creating approximately 200 000 job opportunities for Syrian refugees.
(5)
The relaxation of the rules of origin would be subject to certain conditions with a view to ensuring that the
benefit goes to exporters that contribute to the Jordanian effort of employing Syrian refugees.
(6)
The Annex to this Decision applies to goods produced in production facilities located in dedicated development
zones and industrial areas within Jordan and contributing to the generation of employment for Syrian refugees
and for the Jordanian population.
(7)
The objective of this initiative is to stimulate trade and investment in those development zones and industrial
areas and thereby contribute to improved economic and employment opportunities for Syrian refugees and for
the Jordanian population.
L 208/10
EN
Official Journal of the European Union
2.8.2016
(8)
Annex II to Protocol 3 of the Agreement should therefore be complemented in order to specify the list of
working or processing required to be carried out on non-originating materials in order for such products to
obtain originating status. This complementary list of working or processing should be based on the origin rules
applied by the Union for imports from least-developed countries under the Generalised Scheme of Preferences /
Everything But Arms initiative.
(9)
There should be a possibility to suspend temporarily the application of the Annex to this Decision, establishing
a complementary list of working and processing in relation to a specific production facility if the conditions laid
out in Article 1.1 of the Annex to this Decision are not met by that facility.
(10)
There should also be a possibility to suspend temporarily the application of the Annex to this Decision with
respect to any of the products listed in Article 2 of the Annex to this Decision imported in such increased
quantities and under such conditions as to cause, or threaten to cause, serious injuries to Union producers of like
or directly competing products in all or part of the territory of the Union or serious disturbances in any sector of
the economy of the Union, in accordance with Articles 24 and 26 of the Agreement.
(11)
This Decision should be valid for a limited period sufficient to provide an incentive for additional investment and
employment generation and should therefore expire on 31 December 2026. The Union and Jordan will carry out
a mid-term review pursuant to Article 1.7 of the Annex to this Decision, and may amend the Annex to this
Decision through a decision of the Association Committee in the light of experience gained through the
implementation of this Decision.
(12)
The achievement by Jordan of its objective set in the framework of the International Conference of 4 February
2016 of creating approximately 200 000 job opportunities for Syrian refugees would represent a significant
milestone also in respect of the implementation of this Decision, whereupon the Union and Jordan will consider
further simplifying this support measure. This would require an amendment of the Annex to this Decision
through a decision of the Association Committee,
HAS ADOPTED THIS DECISION:
Article 1
Annex II to Protocol 3 of the Agreement, containing the list of working or processing required to be carried out on
non-originating materials in order for the product manufactured to obtain originating status, is amended and
complemented by Annex II(a) to Protocol 3 of the Agreement, contained in the Annex of this Decision.
Article 2
Annex II(a) to Protocol 3 of the Agreement, contained in the Annex to this Decision, specifies the conditions for
application and the list of working or processing required to be carried out on non-originating materials in order for the
product manufactured in specific geographic areas connected with the additional employment of Syrian refugees to
obtain originating status.
Article 3
The Annex shall form an integral part of this Decision.
2.8.2016
EN
Official Journal of the European Union
L 208/11
Article 4
This Decision shall enter into force on the date of its adoption by the Association Committee.
It shall apply until 31 December 2026.
Done in [Amman][Brussels], [x/x/]2016
For the EU-Jordan Association Committee
L 208/12
EN
Official Journal of the European Union
2.8.2016
ANNEX
ANNEX II(a)
ADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NONORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING STATUS
Article 1
Common provisions
A. Definition of origin
1.
For the products listed in Article 2, the following rules may also apply instead of the rules set out in Annex II of
Protocol 3 provided that such products respect the following conditions:
(a) the required working or processing to be carried out on non-originating materials in order for such products to
obtain originating status takes place in production facilities located in one of the following Development Zones and
Industrial Areas: Alhussein Bin Abdullah II Industrial City- Alkarak, Aljeeza Industrial Area- Amman, Alqastal
Industrial Area- Amman, Al Quwayrah Industrial Area- Aqaba, Al Tajamuat Industrial City- Sahab, Dulail Industrial
City- Zarqa, El-Hashmieh Industrial Area- Zarqa, El-Ressaiefeh Industrial Areas- Zarqa, El-Sukhneh Industrial AreaZarqa, Irbid Development Zone and Irbid Alhassan Industrial City, King Abdullah II Bin Alhussein City- Sahab, King
Hussein Bin Talal Development Zone- Mafraq (including Mafraq Industrial City), Ma'an Development Zone- Ma'an,
Marka Industrial Area- Amman, Muwaqqar Industrial City- Amman, Wadi El-Eisheh Industrial Area- Zarqa; and
(b) the total work force of each production facility located in these Development Zones and Industrial Areas in which
such products are worked or processed contains a proportion of Syrian refugees equivalent to at least 15 % during
the first and second years after the entry into force of this Annex and to at least 25 % from the beginning of the
third year after the entry into force of this Annex. The relevant proportion shall be calculated at any point after the
entry into force of this Annex and on an annual basis thereafter taking into account the number of Syrian refugees
that are employed in formal and decent jobs and on a Full-Time Equivalent basis, and that have received a work
permit valid for a minimum period of twelve months under the applicable legislation of Jordan.
2.
The competent authorities of Jordan shall monitor the respect of the conditions laid out in paragraph 1, shall
grant to an exporter of products fulfilling such conditions an authorisation number and shall promptly withdraw such
authorisation number when such conditions are no longer fulfilled.
B. Proof of origin
3.
A proof of origin made out pursuant to this Annex shall contain the following statement in English: ‘Derogation
— Annex II(a) of Protocol 3 — name of the Development Zone or industrial area and authorisation number granted by
the competent authorities of Jordan’.
C. Administrative cooperation
4.
When, in accordance with Article 33(5) of this Protocol, as amended by decision No 1/2006 of the EU-Jordan
Association Council (1), the customs authorities of Jordan inform the European Commission or the requesting customs
authorities of the Member States of the European Union (the ‘Member States’) of the results of the verification, they shall
specify that the products listed in Article 2 fulfil the conditions laid out in paragraph 1.
(1) Decision No 1/2006 of the EU-Jordan Association Council of 15 June 2006 amending Protocol 3 to the Euro-Mediterranean Agreement,
concerning the definition of the concept of originating products and methods of administrative cooperation (OJ L 209, 31.7.2006,
p. 30).
2.8.2016
EN
Official Journal of the European Union
L 208/13
5.
Where the verification procedure or any other available information appears to indicate that the conditions laid
out in paragraph 1 are not fulfilled, Jordan shall, on its own initiative or at the request of the European Commission or
the customs authorities of the Member States, carry out appropriate inquiries or arrange for such inquiries to be carried
out with due urgency to identify and prevent such contraventions. For this purpose, the European Commission or the
customs authorities of the Member States may participate in the inquiries.
D. Report, monitoring and review
6.
Each year after the entry into force of this Annex, Jordan shall submit a report to the European Commission on
the operation and effects of this Annex, including production and export statistics at 8 digit level or the highest level of
detail available, and a list identifying the companies producing in the Development Zones and Industrial Areas and
specifying the percentage of Syrian refugees they each employed on a year-by-year basis. The Parties shall jointly review
such reports and any issues relating to the implementation and monitoring of this Annex in the framework of the
existing bodies created under the Association Agreement and in particular in the Sub-Committee on Industry, Trade and
Services. The Parties shall also consider the involvement of relevant international organisations such as the International
Labour Organisation and the World Bank in the monitoring process.
7.
Four years after the entry into force of this Annex, the Parties shall carry out a mid-term review to determine if
any modifications should be made in light of experience of the implementation of this Annex and the evolution of the
conflict in Syria. Based on this mid-term review, the Association Committee may consider possible amendments to this
Annex.
8.
Once Jordan achieves its target of facilitating a greater participation of Syrian refugees in the formal labour market
by issuing a total number of around 200,000 work permits to Syrian refugees, the Parties will consider further
simplifying the provisions of this Annex taking into consideration the developments in the Syrian refugee crisis. The
Association Committee may amend this Annex to this effect.
E. Temporary suspension
9. (a) The Union may refer the matter to the Association Committee where the Union considers that there is
insufficient evidence of Jordan or any specific production facility complying with the conditions laid out in
paragraph 1. The referral shall identify whether the failure to comply with the conditions laid out in paragraph 1
is attributable to Jordan or any specific production facility.
(b) If within 90 days of the matter being referred to it, the Association Committee fails to declare that the respect of
the conditions laid out in paragraph 1 is ensured, or if it fails to amend this Annex, the application of this Annex
shall be suspended. The extent of the suspension shall be that identified in the referral of the Union to the
Association Committee.
(c) The Association Committee may also decide to extend the 90-day period in which case the suspension shall take
effect where the Association Council has failed to take any of the actions identified in point (b) within the
extended period of time.
(d) The application of this Annex may resume if the Association Committee so decides.
(e) In the event of a suspension, this Annex shall continue to apply for a period of 4 months in relation to goods
which are either in transit, or in temporary storage in customs warehouses or in free zones in the Union, on the
date of temporary suspension of the Annex and for which a proof of origin was properly made out in
accordance with the provisions of this Annex prior to the date of temporary suspension.
F. Safeguard mechanism
10. Where a product listed in Article 2 benefiting from the application of this Annex is imported in such increased
quantities and under such conditions as to cause, or threaten to cause, serious injury to Union producers of like or
directly competitive products in all or part of the territory of the Union or serious disturbances in any sector of the
L 208/14
Official Journal of the European Union
EN
2.8.2016
economy of the Union, in accordance with Articles 24 and 26 of the Agreement, the Union may refer the matter for
examination to the Association Committee. If within 90 days of the matter being referred to it, the Association
Committee fails to adopt a decision putting an end to such serious injury or threat thereof or serious disturbances or if
no other satisfactory solution has been reached, the application of this Annex shall be suspended with respect to that
product, until the Association Committee adopts a decision declaring that they have ended or until a satisfactory
solution has been reached by the Parties and is notified to the Association Committee.
G. Entry into force and application
11. This Annex shall apply from the day of entry into force of the Association Committee decision to which it is
attached and until 31 December 2026.
Article 2
List of products and of required working and processing
The list of products to which this Annex applies and the rules of working and processing that may be applied as an
alternative to those listed in Annex II are set out below.
Annex I to Protocol 3 of the Agreement containing the introductory notes to the list in Annex II to Protocol 3 of the
Agreement applies mutatis mutandis to the list below, subject to the following amendments:
In Note 5.2, the following basic materials are added in the second paragraph:
— glass fibres;
— metal fibres.
In Note 7.3, the text is replaced by the following:
For the purposes of headings ex 2707 and 2713, simple operations, such as cleaning, decanting, desalting, waterseparation, filtering, colouring, marking, obtaining a sulphur-content as a result of mixing products with different
sulphur-contents, or any combination of these operations or like operations, do not confer origin.
ex Chapter 25 Salt; sulphur; earths and stone; plastering mate Manufacture from materials of any heading, except
rials, lime and cement; except for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 2519
Crushed natural magnesium carbonate (magne Manufacture from materials of any heading, except
site), in hermetically-sealed containers, and mag that of the product. However, natural magnesium
nesium oxide, whether or not pure, other than carbonate (magnesite) may be used
fused magnesia or dead-burned (sintered) magne
sia
ex Chapter 27 Mineral fuels, mineral oils and products of their Manufacture from materials of any heading, except
distillation; bituminous substances; mineral that of the product
waxes, except for:
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
ex 2707
2710
2711
EN
Official Journal of the European Union
L 208/15
Oils in which the weight of the aromatic consti
tuents exceeds that of the non-aromatic constitu
ents, being oils similar to mineral oils obtained
by distillation of high temperature coal tar, of
which more than 65 % by volume distils at a tem
perature of up to 250°C (including mixtures of
petroleum spirit and benzole), for use as power
or heating fuels
Operations of refining and/or one or more specific
process(es) (1)
Petroleum oils and oils obtained from bitumi
nous materials, other than crude; preparations
not elsewhere specified or included, containing
by weight 70 % or more of petroleum oils or of
oils obtained from bituminous materials, these
oils being the basic constituents of the prepara
tions; waste oils
Operations of refining and/or one or more specific
process(es) (2)
or
Other operations in which all the materials used are
classified within a heading other than that of the
product. However, materials of the same heading as
the product may be used, provided that their total
value does not exceed 50 % of the ex-works price
of the product
or
Other operations in which all the materials used are
classified within a heading other than that of the
product. However, materials of the same heading as
the product may be used, provided that their total
value does not exceed 50 % of the ex-works price
of the product
Petroleum gases and other gaseous hydrocarbons Operations of refining and/or one or more specific
process(es)
or
Other operations in which all the materials used are
classified within a heading other than that of the
product. However, materials of the same heading as
the product may be used, provided that their total
value does not exceed 50 % of the ex-works price
of the product
2712
2713
Petroleum jelly; paraffin wax, microcrystalline
petroleum wax, slack wax, ozokerite, lignite wax,
peat wax, other mineral waxes, and similar prod
ucts obtained by synthesis or by other processes,
whether or not coloured
Operations of refining and/or one or more specific
process(es) (2)
or
Other operations in which all the materials used are
classified within a heading other than that of the
product. However, materials of the same heading as
the product may be used, provided that their total
value does not exceed 50 % of the ex-works price
of the product
Petroleum coke, petroleum bitumen and other re Operations of refining and/or one or more specific
sidues of petroleum oils or of oils obtained from process(es) (1)
bituminous materials
or
Other operations in which all the materials used are
classified within a heading other than that of the
product. However, materials of the same heading as
the product may be used, provided that their total
value does not exceed 50 % of the ex-works price
of the product
L 208/16
Official Journal of the European Union
EN
2.8.2016
ex Chapter 28 Inorganic chemicals; organic or inorganic com Manufacture from materials of any heading, except
pounds of precious metals, of rare-earth metals, that of the product. However, materials of the same
of radioactive elements or of isotopes; except for: heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 2811
Sulphur trioxide
Manufacture from sulphur dioxide
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 2840
Sodium perborate
Manufacture from disodium tetraborate pentahy
drate
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2843
Colloidal precious metals; inorganic or organic Manufacture from materials of any heading, includ
compounds of precious metals, whether or not ing other materials of heading 2843
chemically defined; amalgams of precious metals
ex 2852
– Mercury compounds of internal ethers and Manufacture from materials of any heading. How
their halogenated, sulphonated, nitrated or ni ever, the value of all the materials of heading 2909
trosated derivatives
used shall not exceed 20 % of the ex-works price of
the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
– Mercury compounds of nucleic acids and their Manufacture from materials of any heading. How
salts, whether or not chemically defined; other ever, the value of all the materials of headings
heterocyclic compounds
2852, 2932, 2933 and 2934 used shall not exceed
20 % of the ex-works price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 29 Organic chemicals; except for:
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
ex 2905
EN
Official Journal of the European Union
L 208/17
Metal alcoholates of alcohols of this heading and Manufacture from materials of any heading, includ
of ethanol; except for:
ing other materials of heading 2905. However, met
al alcoholates of this heading may be used, provided
that their total value does not exceed 20 % of the
ex-works price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2905 43;
Mannitol; D-glucitol (sorbitol); Glycerol
2905 44;
2905 45
Manufacture from materials of any sub-heading, ex
cept that of the product. However, materials of the
same sub-heading as the product may be used, pro
vided that their total value does not exceed 20 % of
the ex-works price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2915
Saturated acyclic monocarboxylic acids and their
anhydrides, halides, peroxides and peroxyacids;
their halogenated, sulphonated, nitrated or nitro
sated derivatives
Manufacture from materials of any heading. How
ever, the value of all the materials of headings 2915
and 2916 used shall not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 2932
– Internal ethers and their halogenated, sulpho Manufacture from materials of any heading. How
nated, nitrated or nitrosated derivatives
ever, the value of all the materials of heading 2909
used shall not exceed 20 % of the ex-works price of
the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
– Cyclic acetals and internal hemiacetals and Manufacture from materials of any heading
their halogenated, sulphonated, nitrated or ni or
trosated derivatives
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2933
Heterocyclic compounds with nitrogen hetero- Manufacture from materials of any heading. How
atom(s) only
ever, the value of all the materials of headings 2932
and 2933 used shall not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
L 208/18
2934
Official Journal of the European Union
EN
2.8.2016
Nucleic acids and their salts, whether or not che Manufacture from materials of any heading. How
mically defined; other heterocyclic compounds
ever, the value of all the materials of headings
2932, 2933 and 2934 used shall not exceed 20 %
of the ex-works price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Chapter 31
Fertilisers
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Chapter 32
Tanning or dyeing extracts; tannins and their de
rivatives; dyes, pigments and other colouring
matter; paints and varnishes; putty and other
mastics; inks
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 33 Essential oils and resinoids; perfumery, cosmetic Manufacture from materials of any heading, except
or toilet preparations; except for:
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3301
Essential oils (terpeneless or not), including con
cretes and absolutes; resinoids; extracted oleores
ins; concentrates of essential oils in fats, in fixed
oils, in waxes or the like, obtained by enfleurage
or maceration; terpenic by-products of the deter
penation of essential oils; aqueous distillates and
aqueous solutions of essential oils.
Manufacture from materials of any heading, includ
ing materials of a different ‘group’ (3) in this head
ing. However, materials of the same group as the
product may be used, provided that their total value
does not exceed 20 % of the ex-works price of the
product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
Official Journal of the European Union
EN
ex Chapter 34 Soap, organic surface-active agents, washing pre
parations, lubricating preparations, artificial
waxes, prepared waxes, polishing or scouring
preparations, candles and similar articles, model
ling pastes, ‘dental waxes’ and dental preparations
with a basis of plaster, except for:
L 208/19
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3404
Artificial waxes and prepared waxes:
Manufacture from materials of any heading
— With a basis of paraffin, petroleum waxes,
waxes obtained from bituminous minerals,
slack wax or scale wax
Chapter 35
Albuminoidal substances;
glues; enzymes
modified
starches; Manufacture from materials of any heading, except
that of the product, in which the value of all the
materials used does not exceed 70 % of the exworks price of the product
Chapter 37
Photographic or cinematographic goods
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 38 Miscellaneous chemical products; except for:
Manufacture from materials of any heading, except
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 20 % of the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3803
Refined tall oil
Refining of crude tall oil
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3805
Spirits of sulphate turpentine, purified
Purification by distillation or refining of raw spirits
of sulphate turpentine
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
L 208/20
3806 30
Official Journal of the European Union
EN
Ester gums
2.8.2016
Manufacture from resin acids
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3807
Wood pitch (wood tar pitch)
Distillation of wood tar
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
3809 10
Finishing agents, dye carriers to accelerate the Manufacture in which the value of all the materials
dyeing or fixing of dyestuffs and other products used does not exceed 70 % of the ex-works price of
and preparations (for example, dressings and the product
mordants), of a kind used in the textile, paper,
leather or like industries, not elsewhere specified
or included: With a basis of amylaceous sub
stances
3823
Industrial monocarboxylic fatty acids; acid oils Manufacture from materials of any heading, includ
from refining; industrial fatty alcohols
ing other materials of heading 3823
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
3824 60
Sorbitol other than that of sub-heading 2905 44 Manufacture from materials of any sub-heading, ex
cept that of the product and except materials of
sub-heading 2905 44. However, materials of the
same sub-heading as the product may be used, pro
vided that their total value does not exceed 20 % of
the exworks price of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 39 Plastics and articles thereof; except for:
Manufacture from materials of any heading, except
that of the product.
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3907
– Copolymer, made from polycarbonate and ac Manufacture from materials of any heading, except
rylonitrile-butadiene-styrene copolymer (ABS)
that of the product. However, materials of the same
heading as the product may be used, provided that
their total value does not exceed 50 % of the exworks price of the product (4)
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
Official Journal of the European Union
EN
– Polyester
L 208/21
Manufacture from materials of any heading, except
that of the product
or
Manufacture from polycarbonate of tetrabromo-(bi
sphenol A)
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3920
Ionomer sheet or film
Manufacture from a thermoplastic partial salt which
is a copolymer of ethylene and metacrylic acid
partly neutralised with metal ions, mainly zinc and
sodium
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 3921
Foils of plastic, metallised
Manufacture from highly-transparent polyester-foils
with a thickness of less than 23 micron (5)
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 40 Rubber and articles thereof; except for:
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
4012
Retreaded or used pneumatic tyres of rubber; so
lid or cushion tyres, tyre treads and tyre flaps, of
rubber:
– Retreaded pneumatic, solid or cushion tyres, of Retreading of used tyres
rubber
– Other
Manufacture from materials of any heading, except
those of headings 4011 and 4012
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 41 Raw hides and skins (other than furskins) and Manufacture from materials of any heading, except
leather; except for:
that of the product
L 208/22
EN
Official Journal of the European Union
2.8.2016
4101 to
4103
Raw hides and skins of bovine (including buffalo) Manufacture from materials of any heading
or equine animals (fresh, or salted, dried, limed,
pickled or otherwise preserved, but not tanned,
parchment dressed or further prepared), whether
or not dehaired or split; raw skins of sheep or
lambs (fresh, or salted, dried, limed, pickled or
otherwise preserved, but not tanned, parchment
dressed or further prepared), whether or not with
wool on or split, other than those excluded by
note 1(c) to Chapter 41; other raw hides and
skins (fresh, or salted, dried, limed, pickled or
otherwise preserved, but not tanned, parchment
dressed or further prepared), whether or not de
haired or split, other than those excluded by
note 1(b) or 1(c) to Chapter 41
4104 to
4106
Tanned or crust hides and skins, without wool or Re-tanning of tanned or pre-tanned hides and skins
hair on, whether or not split, but not further pre of sub-headings 4104 11, 4104 19, 4105 10,
pared
4106 21, 4106 31 or 4106 91,
or
Manufacture from materials of any heading, except
that of the product
4107, 4112,
4113
Leather further prepared after tanning or crusting Manufacture from materials of any heading, except
that of the product. However, materials of sub-head
ings 4104 41, 4104 49, 4105 30, 4106 22,
4106 32 and 4106 92 may be used only if a re-tan
ning operation of the tanned or crust hides and
skins in the dry state takes place
Chapter 42
Articles of leather; saddlery and harness; travel Manufacture from materials of any heading, except
goods, handbags and similar containers; articles that of the product
of animal gut (other than silk worm gut)
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 43 Furskins and artificial fur; manufactures thereof; Manufacture from materials of any heading, except
except for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
4301
Raw furskins (including heads, tails, paws and Manufacture from materials of any heading
other pieces or cuttings, suitable for furrier's use),
other than raw hides and skins of heading 4101,
4102 or 4103
2.8.2016
ex 4302
4303
Official Journal of the European Union
EN
L 208/23
Tanned or dressed furskins, assembled:
– Plates, crosses and similar forms
Bleaching or dyeing, in addition to cutting and as
sembly of non-assembled tanned or dressed furskins
– Other
Manufacture from
dressed furskins
non-assembled,
tanned
or
Articles of apparel, clothing accessories and other Manufacture from non-assembled tanned or dressed
articles of furskin
furskins of heading 4302
ex Chapter 44 Wood and articles of wood; wood charcoal; ex Manufacture from materials of any heading, except
cept for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 4407
Wood sawn or chipped lengthwise, sliced or Planing, sanding or end-jointing
peeled, of a thickness exceeding 6 mm, planed,
sanded or end-jointed
ex 4408
Sheets for veneering (including those obtained by Splicing, planing, sanding or endjointing
slicing laminated wood) and for plywood, of
a thickness not exceeding 6 mm, spliced, and
other wood sawn lengthwise, sliced or peeled of
a thickness not exceeding 6 mm, planed, sanded
or end-jointed
ex 4410 to
ex 4413
Beadings and mouldings, including moulded Beading or moulding
skirting and other moulded boards
ex 4415
Packing cases, boxes, crates, drums and similar Manufacture from boards not cut to size
packings, of wood
ex 4418
– Builders' joinery and carpentry of wood
Manufacture from materials of any heading, except
that of the product. However, cellular wood panels,
shingles and shakes may be used
– Beadings and mouldings
Beading or moulding
ex 4421
Match splints; wooden pegs or pins for footwear Manufacture from wood of any heading, except
drawn wood of heading 4409
ex Chapter 51 Wool, fine or coarse animal hair; horsehair yarn Manufacture from materials of any heading, except
and woven fabric; except for:
that of the product
5106 to
5110
Yarn of wool, of fine or coarse animal hair or of Spinning of natural fibres or extrusion of manhorsehair
made fibres accompanied by spinning (6)
L 208/24
5111 to
5113
Official Journal of the European Union
EN
2.8.2016
Woven fabrics of wool, of fine or coarse animal Weaving (6)
hair or of horsehair:
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
ex Chapter 52 Cotton; except for:
Manufacture from materials of any heading, except
that of the product
5204 to
5207
Yarn and thread of cotton
Spinning of natural fibres or extrusion of manmade fibres accompanied by spinning (6)
5208 to
5212
Woven fabrics of cotton:
Weaving (6)
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
ex Chapter53
Other vegetable textile fibres; paper yarn and wo Manufacture from materials of any heading, except
ven fabrics of paper yarn; except for:
that of the product
5306 to
5308
Yarn of other vegetable textile fibres; paper yarn Spinning of natural fibres or extrusion of manmade fibres accompanied by spinning (6)
5309 to
5311
Woven fabrics of other vegetable textile fibres; Weaving (6)
woven fabrics of paper yarn:
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
5401 to
5406
Yarn, monofilament and thread of man-made fi Extrusion of man-made fibres accompanied by spin
laments
ning OR spinning of natural fibres (6)
5407 and
5408
Woven fabrics of man-made filament yarn:
Weaving (6)
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
5501 to
5507
Man-made staple fibres
Extrusion of man-made fibres
2.8.2016
Official Journal of the European Union
EN
L 208/25
5508 to
5511
Yarn and sewing thread of man-made staple fi Spinning of natural fibres or extrusion of manbres
made fibres accompanied by spinning (6)
5512 to
5516
Woven fabrics of man-made staple fibres:
Weaving (6)
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
ex Chapter56
Wadding, felt and non-wovens; special yarns; Extrusion of man-made fibres accompanied by spin
twine, cordage, ropes and cables and articles ning or spinning of natural fibres
thereof; except for:
or
Flocking accompanied by dyeing or printing (6)
5602
Felt, whether or not impregnated, coated, covered
or laminated:
– Needleloom felt
Extrusion of man-made fibres accompanied by fab
ric formation,
However:
— polypropylene filament of heading 5402,
— polypropylene fibres of heading 5503 or 5506,
or
— polypropylene filament tow of heading 5501,
of which the denomination in all cases of a single
filament or fibre is less than 9 decitex,
may be used, provided that their total value does
not exceed 40 % of the ex-works price of the prod
uct
or
Fabric formation alone in the case of felt made
from natural fibres (6)
– Other
Extrusion of man-made fibres accompanied by fab
ric formation,
or
Fabric formation alone in the case of other felt
made from natural fibres (6)
5603
Nonwovens, whether or not impregnated, coated, Any non-woven process including needle punching
covered or laminated
5604
Rubber thread and cord, textile covered; textile
yarn, and strip and the like of heading 5404 or
5405, impregnated, coated, covered or sheathed
with rubber or plastics:
– Rubber thread and cord, textile covered
Manufacture from rubber thread or cord, not textile
covered
L 208/26
Official Journal of the European Union
EN
– Other
2.8.2016
Extrusion of man-made fibres accompanied by spin
ning or spinning of natural fibres (6)
5605
Metallised yarn, whether or not gimped, being Extrusion of man-made fibres accompanied by spin
textile yarn, or strip or the like of heading 5404 ning or spinning of natural and/or man-made staple
or 5405, combined with metal in the form of fibres (6)
thread, strip or powder or covered with metal
5606
Gimped yarn, and strip and the like of heading
5404 or 5405, gimped (other than those of
heading 5605 and gimped horsehair yarn); che
nille yarn (including flock chenille yarn); loop
wale-yarn
Extrusion of man-made fibres accompanied by spin
ning or spinning of natural and/or man-made staple
fibres
or
Spinning accompanied with flocking
or
Flocking accompanied by dyeing (6)
Chapter 57
Carpets and other textile floor coverings:
Spinning of natural and/or man-made staple fibres
or extrusion of man-made filament yarn, in each
case accompanied by weaving
or
Manufacture from coir yarn or sisal yarn or jute
yarn
or
Flocking accompanied by dyeing or by printing
or
Tufting accompanied by dyeing or by printing
Extrusion of man-made fibres accompanied by nonwoven techniques including needle punching (6)
However:
— polypropylene filament of heading 5402,
— polypropylene fibres of heading 5503 or 5506,
or
— polypropylene filament tow of heading 5501,
of which the denomination in all cases of a single
filament or fibre is less than 9 decitex, may be used,
provided that their total value does not exceed
40 % of the ex-works price of the product
Jute fabric may be used as a backing
ex Chapter 58 Special woven fabrics; tufted textile fabrics; lace; Weaving (6)
tapestries; trimmings; embroidery; except for:
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendaring, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed
47,5 % of the ex-works price of the product
2.8.2016
Official Journal of the European Union
EN
L 208/27
5805
Hand-woven tapestries of the types Gobelins, Manufacture from materials of any heading, except
Flanders, Aubusson, Beauvais and the like, and that of the product
needle-worked tapestries (for example, petit
point, cross stitch), whether or not made up
5810
Embroidery in the piece, in strips or in motifs
Manufacture in which the value of all the materials
used does not exceed 50 % of the ex-works price of
the product
5901
Textile fabrics coated with gum or amylaceous
substances, of a kind used for the outer covers of
books or the like; tracing cloth; prepared painting
canvas; buckram and similar stiffened textile fab
rics of a kind used for hat foundations
Weaving accompanied by dyeing or by flocking or
by coating
5902
or
Flocking accompanied by dyeing or printing
Tyre cord fabric of high tenacity yarn of nylon or
other polyamides, polyesters or viscose rayon:
– Containing not more than 90 % by weight of Weaving
textile materials
– Other
Extrusion of man-made fibres accompanied by
weaving
5903
Textile fabrics impregnated, coated, covered or Weaving accompanied by dyeing or by coating
laminated with plastics, other than those of head or
ing 5902
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendering, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling), provided
that the value of the unprinted fabric used does not
exceed 47,5 % of the ex-works price of the product
5904
Linoleum, whether or not cut to shape; floor Weaving accompanied by dyeing or by coating (6)
coverings consisting of a coating or covering ap
plied on a textile backing, whether or not cut to
shape
5905
Textile wall coverings:
– Impregnated, coated, covered or laminated Weaving accompanied by dyeing or by coating
with rubber, plastics or other materials
L 208/28
Official Journal of the European Union
EN
– Other
2.8.2016
Spinning of natural and/or man-made staple fibres
or extrusion of man-made filament yarn, in each
case accompanied by weaving
or
Weaving accompanied by dyeing or by coating
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendering, shrink
resistance
processing,
permanent
finishing,
decatising, impregnating, mending and burling),
provided that the value of the unprinted fabric used
does not exceed 47,5 % of the ex-works price of
the product (6):
5906
Rubberised textile fabrics, other than those of
heading 5902:
– Knitted or crocheted fabrics
Spinning of natural and/or man-made staple fibres
or extrusion of man-made filament yarn, in each
case accompanied by knitting
or
Knitting accompanied by dyeing or by coating
or
Dyeing of yarn of natural fibres accompanied by
knitting (6)
– Other fabrics made of synthetic filament yarn, Extrusion of man-made fibres accompanied by
containing more than 90 % by weight of tex weaving
tile materials
– Other
Weaving accompanied by dyeing or by coating
or
Dyeing of yarn of natural fibres accompanied by
weaving
5907
Textile fabrics otherwise impregnated, coated or Weaving accompanied by dyeing or by flocking or
covered; painted canvas being theatrical scenery, by coating
studio back-cloths or the like
or
Flocking accompanied by dyeing or by printing
or
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerising, heat setting, raising, calendering, shrink
resistance processing, permanent finishing, decatis
ing, impregnating, mending and burling), provided
that the value of the unprinted fabric used does not
exceed 47,5 % of the ex-works price of the product
2.8.2016
5908
5909 to
5911
Official Journal of the European Union
EN
L 208/29
Textile wicks, woven, plaited or knitted, for
lamps, stoves, lighters, candles or the like; incan
descent gas mantles and tubular knitted gas man
tle fabric therefor, whether or not impregnated:
– Incandescent gas mantles, impregnated
Manufacture from tubular knitted gas-mantle fabric
– Other
Manufacture from materials of any heading, except
that of the product
Textile articles of a kind suitable for industrial
use:
– Polishing discs or rings other than of felt of Weaving
heading 5911
– Woven fabrics, of a kind commonly used in Weaving (6)
papermaking or other technical uses, felted or
not, whether or not impregnated or coated,
tubular or endless with single or multiple warp
and/or weft, or flat woven with multiple warp
and/or weft of heading 5911
– Other
Extrusion of man-made filament yarn OR spinning
of natural or man-made staple fibres, accompanied
by weaving (6)
or
Weaving accompanied by dyeing or coating
Chapter 60
Knitted or crocheted fabrics
Spinning of natural and/or man-made staple fibres
or extrusion of man-made filament yarn, in each
case accompanied by knitting
or
Knitting accompanied by dyeing or by flocking or
by coating
or
Flocking accompanied by dyeing or by printing
or
Dyeing of yarn of natural fibres accompanied by
knitting
or
Twisting or texturing accompanied by knitting pro
vided that the value of the non-twisted/non-textured
yarns used does not exceed 47,5 % of the ex-works
price of the product
Chapter 61
Articles of apparel and clothing accessories,
knitted or crocheted:
– Obtained by sewing together or otherwise as Manufacture from fabric
sembling, two or more pieces of knitted or
crocheted fabric which have been either cut to
form or obtained directly to form
L 208/30
Official Journal of the European Union
EN
– Other
2.8.2016
Spinning of natural and/or man-made staple fibres
or extrusion of man-made filament yarn, in each
case accompanied by knitting (knitted to shape
products)
or
Dyeing of yarn of natural fibres accompanied by
knitting (knitted to shape products) (6)
ex Chapter 62 Articles of apparel and clothing accessories, not Manufacture from fabric
knitted or crocheted; except for:
6213 and
6214
Handkerchiefs, shawls, scarves, mufflers, mantil
las, veils and the like:
– Embroidered
Weaving accompanied by making-up (including cut
ting)
OR
Manufacture from unembroidered fabric, provided
that the value of the unembroidered fabric used
does not exceed 40 % of the ex-works price of the
product (7)
OR
Making-up preceded by printing accompanied by at
least two preparatory or finishing operations (such
as scouring, bleaching, mercerising, heat setting,
raising, calendering, shrink resistance processing,
permanent finishing, decatising, impregnating,
mending and burling), provided that the value of
the unprinted fabric used does not exceed 47,5 %
of the ex-works price of the product (6) (7)
– Other
Weaving accompanied by making-up (including cut
ting)
or
Making-up followed by printing accompanied by at
least two preparatory finishing operations (such as
scouring, bleaching, mercerising, heat setting, rais
ing, calendering, shrink resistance processing, per
manent finishing, decatising, impregnating, mend
ing and burling), provided that the value of the un
printed fabric used does not exceed 47,5 % of the
ex-works price of the product (6) (7)
6217
Other made up clothing accessories; parts of gar
ments or of clothing accessories, other than
those of heading 6212:
– Embroidered
Weaving accompanied by making-up (including cut
ting)
or
Manufacture from unembroidered fabric, provided
that the value of the unembroidered fabric used
does not exceed 40 % of the ex-works price of the
product (7)
2.8.2016
Official Journal of the European Union
EN
L 208/31
– Fire-resistant equipment of fabric covered with Weaving accompanied by making-up (including cut
foil of aluminised polyester
ting)
or
Coating provided that the value of the uncoated fab
ric used does not exceed 40 % of the ex-works price
of the product accompanied by making-up (includ
ing cutting) (7)
– Interlinings for collars and cuffs, cut out
Manufacture from materials of any heading, except
that of the product, and in which the value of all
the materials used does not exceed 40 % of the exworks price of the product
ex Chapter 63 Other made-up textile articles; sets; worn cloth Manufacture from materials of any heading, except
ing and worn textile articles; rags; except for:
that of the product
6301 to
6304
Blankets, travelling rugs, bed linen etc.; curtains
etc.; other furnishing articles:
– Of felt, of nonwovens
Any non-woven process including needle punching
accompanied by making up (including cutting)
– Other:
– – Embroidered
Weaving or knitting accompanied by making-up (in
cluding cutting)
or
Manufacture from unembroidered fabric, provided
that the value of the unembroidered fabric used
does not exceed 40 % of the ex-works price of the
product (7) (8)
– – Other
Weaving or knitting accompanied by making-up (in
cluding cutting)
6305
Sacks and bags, of a kind used for the packing of Weaving or knitting and making-up (including cut
ting) (6)
goods
6306
Tarpaulins, awnings and sun blinds; tents; sails
for boats, sailboards or landcraft; camping goods:
– Of nonwovens
Any non-woven process including needle punching
accompanied by making up (including cutting)
– Other
Weaving accompanied by making-up (including cut
ting) (6) (7)
or
Coating provided that the value of the uncoated fab
ric used does not exceed 40 % of the ex-works price
of the product accompanied by making-up (includ
ing cutting)
6307
Other made-up articles, including dress patterns Manufacture in which the value of all the materials
used does not exceed 40 % of the ex-works price of
the product
L 208/32
6308
Official Journal of the European Union
EN
Sets consisting of woven fabric and yarn, whether
or not with accessories, for making up into rugs,
tapestries, embroidered table cloths or serviettes,
or similar textile articles, put up in packings for
retail sale
2.8.2016
Each item in the set must satisfy the rule which
would apply to it if it were not included in the set.
However, non-originating articles may be incorpor
ated, provided that their total value does not exceed
25 % of the ex-works price of the set
ex Chapter 64 Footwear, gaiters and the like; parts of such arti Manufacture from materials of any heading, except
cles; except for:
from assemblies of uppers affixed to inner soles or
to other sole components of heading 6406
6406
Parts of footwear (including uppers whether or Manufacture from materials of any heading, except
not attached to soles other than outer soles); re that of the product
movable in-soles, heel cushions and similar arti
cles; gaiters, leggings and similar articles, and
parts thereof
Chapter 65
Headgear and parts thereof
Manufacture from materials of any heading, except
that of the product
ex Chapter 68 Articles of stone, plaster, cement, asbestos, mica Manufacture from materials of any heading, except
or similar materials, except for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 6803
Articles of slate or of agglomerated slate
Manufacture from worked slate
ex 6812
Articles of asbestos; articles of mixtures with a ba Manufacture from materials of any heading
sis of asbestos or of mixtures with a basis of as
bestos and magnesium carbonate
ex 6814
Articles of mica, including agglomerated or re Manufacture from worked mica (including agglom
constituted mica, on a support of paper, paper erated or reconstituted mica)
board or other materials
Chapter 69
Ceramic products
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 70 Glass and glassware, except for:
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
7006
Glass of heading 7003, 7004 or 7005, bent,
edge-worked, engraved, drilled,
– Glass-plate substrates, coated with a dielectric Manufacture from non-coated glass-plate substrate
thin film, and of a semiconductor grade in ac of heading 7006
cordance with SEMII-standards (9)
– Other
Manufacture from materials of heading 7001
2.8.2016
7010
7013
Official Journal of the European Union
EN
Carboys, bottles, flasks, jars, pots, phials, am
poules and other containers, of glass, of a kind
used for the conveyance or packing of goods;
preserving jars of glass; stoppers, lids and other
closures, of glass
L 208/33
Manufacture from materials of any heading, except
that of the product
or
Cutting of glassware, provided that the total value
of the uncut glassware used does not exceed 50 %
of the ex-works price of the product
Glassware of a kind used for table, kitchen, toilet, Manufacture from materials of any heading, except
office, indoor decoration or similar purposes that of the product
(other than that of heading 7010 or 7018)
or
Cutting of glassware, provided that the total value
of the uncut glassware used does not exceed 50 %
of the ex-works price of the product
or
Hand-decoration (except silk-screen printing) of
hand-blown glassware, provided that the total value
of the hand-blown glassware used does not exceed
50 % of the ex-works price of the product
ex 7019
Articles (other than yarn) of glass fibres
Manufacture from:
— uncoloured slivers, rovings, yarn or chopped
strands, or
— glass wool
ex Chapter 71 Natural or cultured pearls, precious or semi-pre Manufacture from materials of any heading, except
cious stones, precious metals, metals clad with that of the product
precious metal, and articles thereof; imitation or
jewellery; coin, except for:
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
7106, 7108
and 7110
Precious metals:
– Unwrought
Manufacture from materials of any heading, except
those of headings 7106, 7108 and 7110
or
Electrolytic, thermal or chemical separation of pre
cious metals of heading 7106, 7108 or 7110
or
Fusion and/or alloying of precious metals of head
ing 7106, 7108 or 7110 with each other or with
base metals
– Semi-manufactured or in powder form
ex 7107,
ex 7109 and
ex 7111
Manufacture from unwrought precious metals
Metals clad with precious metals, semi-manufac Manufacture from metals clad with precious metals,
tured
unwrought
L 208/34
Official Journal of the European Union
EN
2.8.2016
7115
Other articles of precious metal or of metal clad Manufacture from materials of any heading, except
with precious metal
that of the product
7117
Imitation jewellery
Manufacture from materials of any heading, except
that of the product
or
Manufacture from base metal parts, not plated or
covered with precious metals, provided that the val
ue of all the materials used does not exceed 50 % of
the ex-works price of the product
ex Chapter 73 Articles of iron or steel; except for:
Manufacture from materials of any heading, except
that of the product
ex 7301
Sheet piling
Manufacture from materials of heading 7207
7302
Railway or tramway track construction material Manufacture from materials of heading 7206
of iron or steel, the following: rails, check-rails
and rack rails, switch blades, crossing frogs, point
rods and other crossing pieces, sleepers (crossties), fish-plates, chairs, chair wedges, sole pates
(base plates), rail clips, bedplates, ties and other
material specialised for jointing or fixing rails
7304, 7305
and 7306
Tubes, pipes and hollow profiles, of iron (other Manufacture from materials of heading 7206,
than cast iron) or steel
7207, 7208, 7209, 7210, 7211, 7212, 7218,
7219, 7220 or 7224
ex 7307
Tube or pipe fittings of stainless steel
7308
Structures (excluding prefabricated buildings of Manufacture from materials of any heading, except
heading 9406) and parts of structures (for exam that of the product. However, welded angles, shapes
ple, bridges and bridge-sections, lock-gates, and sections of heading 7301 may not be used
towers, lattice masts, roofs, roofing frameworks,
doors and windows and their frames and thresh
olds for doors, shutters, balustrades, pillars and
columns), of iron or steel; plates, rods, angles,
shapes, sections, tubes and the like, prepared for
use in structures, of iron or steel
ex 7315
Skid chain
Turning, drilling, reaming, threading, deburring and
sandblasting of forged blanks, provided that the to
tal value of the forged blanks used does not exceed
35 % of the ex-works price of the product
Manufacture in which the value of all the materials
of heading 7315 used does not exceed 50 % of the
ex-works price of the product
ex Chapter 74 Copper and articles thereof; except for:
Manufacture from materials of any heading, except
that of the product
7403
Manufacture from materials of any heading
Refined copper and copper alloys, unwrought
ex Chapter 76 Aluminium and articles thereof; except for:
Manufacture from materials of any heading, except
that of the product
2.8.2016
Official Journal of the European Union
EN
L 208/35
7601
Unwrought aluminium
7607
Aluminium foil (whether or not printed or Manufacture from materials of any heading, except
backed with paper, paperboard, plastics or similar that of the product and heading 7606
backing materials) of a thickness (excluding any
backing) not exceeding 0,2 mm
ex Chapter 78 Lead and articles thereof, except for:
7801
Chapter 80
Manufacture from materials of any heading
Manufacture from materials of any heading, except
that of the product
Unwrought lead:
– Refined lead
Manufacture from materials of any heading
– Other
Manufacture from materials of any heading, except
that of the product. However, waste and scrap of
heading 7802 may not be used
Tin and articles thereof
Manufacture from materials of any heading, except
that of the product
ex Chapter 82 Tools, implements, cutlery, spoons and forks, of Manufacture from materials of any heading, except
base metal; parts thereof of base metal; except that of the product
for:
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8206
Tools of two or more of the headings 8202 to Manufacture from materials of any heading, except
8205, put up in sets for retail sale
those of headings 8202 to 8205. However, tools of
headings 8202 to 8205 may be incorporated into
the set, provided that their total value does not ex
ceed 15 % of the ex-works price of the set
8211
Knives with cutting blades, serrated or not (in Manufacture from materials of any heading, except
cluding pruning knives), other than knives of that of the product. However, knife blades and han
dles of base metal may be used
heading 8208, and blades therefor
8214
Other articles of cutlery (for example; hair clip Manufacture from materials of any heading, except
pers, butchers' or kitchen cleavers, choppers and that of the product. However, handles of base metal
mincing knives, paper knives); manicure or pedi may be used
cure sets and instruments (including nail files)
8215
Spoons, forks, ladles, skimmers, cake-servers, Manufacture from materials of any heading, except
fish-knives, butter-knives, sugar tongs and similar that of the product. However, handles of base metal
kitchen or tableware
may be used
ex Chapter 83 Miscellaneous articles of base metal; except for:
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
L 208/36
Official Journal of the European Union
EN
2.8.2016
ex 8302
Other mountings, fittings and similar articles Manufacture from materials of any heading, except
suitable for buildings, and automatic door closers that of the product. However, other materials of
heading 8302 may be used, provided that their total
value does not exceed 20 % of the ex-works price
of the product
ex 8306
Statuettes and other ornaments, of base metal
Manufacture from materials of any heading, except
that of the product. However, other materials of
heading 8306 may be used, provided that their total
value does not exceed 30 % of the ex-works price
of the product
ex Chapter 84 Nuclear reactors, boilers, machinery and mechan Manufacture from materials of any heading, except
ical appliances; parts thereof; except for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8401
Nuclear reactors; fuel elements (cartridges), non- Manufacture in which the value of all the materials
irradiated, for nuclear reactors; machinery and used does not exceed 70 % of the ex-works price of
the product
apparatus for isotopic separation
8407
Spark-ignition reciprocating or rotary internal Manufacture in which the value of all the materials
combustion piston engines
used does not exceed 70 % of the ex-works price of
the product
8408
Compression-ignition internal combustion piston Manufacture in which the value of all the materials
engines (diesel or semi-diesel engines
used does not exceed 70 % of the ex-works price of
the product
8427
Fork-lift trucks; other works trucks fitted with Manufacture in which the value of all the materials
lifting or handling equipment
used does not exceed 70 % of the ex-works price of
the product
8482
Ball or roller bearings
ex Chapter 85 Electrical machinery and equipment and parts
thereof; sound recorders and reproducers, televi
sion image and sound recorders and reproducers,
and parts and accessories of such articles; except
for:
8501, 8502
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Electric motors and generators; Electric generat Manufacture from materials of any heading, except
ing sets and rotary converters
that of the product and of heading 8503
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
EN
Official Journal of the European Union
L 208/37
8513
Portable electric lamps designed to function by Manufacture from materials of any heading, except
their own source of energy (for example, dry bat that of the product
teries, accumulators, magnetos), other than light or
ing equipment of heading 8512
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8519
Sound recording and sound reproducing ap Manufacture from materials of any heading, except
paratus
that of the product and of heading 8522
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8521
Video recording or reproducing apparatus, Manufacture from materials of any heading, except
whether or not incorporating a video tuner
that of the product and of heading 8522
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8523
Prepared unrecorded media for sound recording Manufacture in which the value of all the materials
or similar recording of other phenomena, other used does not exceed 70 % of the ex-works price of
the product
than products of Chapter 37
8525
Transmission apparatus for radio-broadcasting or
television, whether or not incorporating recep
tion apparatus or sound recording or reprodu
cing apparatus; television cameras, digital cam
eras and other video camera recorders
8526
Manufacture from materials of any heading, except
that of the product and of heading 8529
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Radar apparatus, radio navigational aid apparatus Manufacture from materials of any heading, except
and radio remote control apparatus
that of the product and of heading 8529
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8527
Reception apparatus for radio-broadcasting, Manufacture from materials of any heading, except
whether or not combined, in the same housing, that of the product and of heading 8529
with sound recording or reproducing apparatus or
or a clock
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8528
Monitors and projectors, not incorporating televi
sion reception apparatus; reception apparatus for
television, whether or not incorporating radiobroadcast receivers or sound or video recording
or reproducing apparatus
Manufacture from materials of any heading, except
that of the product and of heading 8529
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
L 208/38
8535 to
8537
EN
Official Journal of the European Union
Electrical apparatus for switching or protecting
electrical circuits, or for making connections to
or in electrical circuits; connectors for optical fi
bres, optical fibre bundles or cables; boards, pa
nels, consoles, desks, cabinets and other bases,
for electric control or the distribution of electri
city
2.8.2016
Manufacture from materials of any heading, except
that of the product and of heading 8538
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
8540 11 and
8540 12
Cathode ray television picture tubes, including vi Manufacture in which the value of all the materials
deo monitor cathode ray tubes
used does not exceed 70 % of the ex-works price of
the product
ex 8542 31
to
ex 8542 33
and
ex 8542 39
Monolithic integrated circuits
8544
Insulated (including enamelled or anodised) wire, Manufacture in which the value of all the materials
cable (including coaxial cable) and other insulated used does not exceed 70 % of the ex-works price of
electric conductors, whether or not fitted with the product
connectors; optical fibre cables, made up of indi
vidually sheathed fibres, whether or not as
sembled with electric conductors or fitted with
connectors
8545
Carbon electrodes, carbon brushes, lamp carbons, Manufacture in which the value of all the materials
battery carbons and other articles of graphite or used does not exceed 70 % of the ex-works price of
other carbon, with or without metal, of a kind the product
used for electrical purposes
8546
Electrical insulators of any material
8547
Insulating fittings for electrical machines, appli Manufacture in which the value of all the materials
ances or equipment, being fittings wholly of insu used does not exceed 70 % of the ex-works price of
lating materials apart from any minor compo the product
nents of metal (for example, threaded sockets) in
corporated during moulding solely for purposes
of assembly, other than insulators of heading
8546; electrical conduit tubing and joints there
for, of base metal lined with insulating material
8548
Waste and scrap of primary cells, primary bat Manufacture in which the value of all the materials
teries and electric accumulators; spent primary used does not exceed 70 % of the ex-works price of
cells, spent primary batteries and spent electric the product
accumulators; electrical parts of machinery or ap
paratus, not specified or included elsewhere in
this Chapter
Manufacture in which the value of all the materials
used does not exceed 50 % of the ex-works price of
the product
or
The operation of diffusion, in which integrated cir
cuits are formed on a semi-conductor substrate by
the selective introduction of an appropriate dopant,
whether or not assembled and/or tested in a nonparty
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
2.8.2016
Chapter 86
EN
Official Journal of the European Union
L 208/39
Railway or tramway locomotives, rolling-stock Manufacture in which the value of all the materials
and parts thereof; railway or tramway track fix used does not exceed 70 % of the ex-works price of
tures and fittings and parts thereof; mechanical the product
(including electro-mechanical) traffic signalling
equipment of all kinds.
ex Chapter 87 Vehicles other than railway or tramway rolling- Manufacture in which the value of all the materials
stock, and parts and accessories thereof; except used does not exceed 70 % of the ex-works price of
the product
for:
8711
Motorcycles (including mopeds) and cycles fitted Manufacture from materials of any heading, except
with an auxiliary motor, with or without side- that of the product
cars; side-cars
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 90 Optical, photographic, cinematographic, measur Manufacture from materials of any heading, except
ing, checking, precision, medical or surgical in that of the product
struments and apparatus; parts and accessories or
thereof, except for:
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
9002
Lenses, prisms, mirrors and other optical ele Manufacture in which the value of all the materials
ments, of any material, mounted, being parts of used does not exceed 70 % of the ex-works price of
or fittings for instruments or apparatus, other the product
than such elements of glass not optically worked
9033
Parts and accessories (not specified or included Manufacture in which the value of all the materials
elsewhere in this Chapter) for machines, appli used does not exceed 70 % of the ex-works price of
the product
ances, instruments or apparatus of Chapter 90
Chapter 91
Clocks and watches and parts thereof
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
Chapter 94
Furniture; bedding, mattresses, mattress supports,
cushions and similar stuffed furnishings; lamps
and lighting fittings, not elsewhere specified or
included; illuminated signs, illuminated nameplates and the like; prefabricated buildings
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex Chapter 95 Toys, games and sports requisites; parts and ac Manufacture from materials of any heading, except
cessories thereof, except for:
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
ex 9506
Golf clubs and parts thereof
Manufacture from materials of any heading, except
that of the product. However, roughly-shaped
blocks for making golf-club heads may be used
L 208/40
EN
Official Journal of the European Union
ex Chapter 96 Miscellaneous manufactured articles, except for:
2.8.2016
Manufacture from materials of any heading, except
that of the product
or
Manufacture in which the value of all the materials
used does not exceed 70 % of the ex-works price of
the product
9601 and
9602
Worked ivory, bone, tortoiseshell, horn, antlers, Manufacture from materials of any heading
coral, mother-of-pearl and other animal carving
material, and articles of these materials (including
articles obtained by moulding.
Worked vegetable or mineral carving material
and articles of these materials; moulded or carved
articles of wax, of stearin, of natural gums or nat
ural resins or of modelling pastes, and other
moulded or carved articles, not elsewhere speci
fied or included; worked, unhardened gelatine
(except gelatine of heading 3503) and articles of
unhardened gelatin
9603
Brooms, brushes (including brushes constituting Manufacture in which the value of all the materials
parts of machines, appliances or vehicles), hand- used does not exceed 70 % of the ex-works price of
operated mechanical floor sweepers, not motor the product
ized, mops and feather dusters; prepared knots
and tufts for broom or brush making; paint pads
and rollers, squeegees (other than roller squee
gees)
9605
Travel sets for personal toilet, sewing or shoe or Each item in the set must satisfy the rule which
clothes cleaning
would apply to it if it were not included in the set.
However, non-originating articles may be incorpor
ated, provided that their total value does not exceed
15 % of the ex-works price of the set
9606
Buttons, press-fasteners, snap-fasteners and press- Manufacture:
studs, button moulds and other parts of these ar — from materials of any heading, except that of
ticles; button blanks
the product, and
— in which the value of all the materials used does
not exceed 70 % of the ex-works price of the
product
9608
Ball-point pens; felt-tipped and other porous- Manufacture from materials of any heading, except
tipped pens and markers; fountain pens, stylo that of the product. However, nibs or nib-points of
graph pens and other pens; duplicating stylos; the same heading as the product may be used
propelling or sliding pencils; pen-holders, pencil
holders and similar holders; parts (including caps
and clips) of the foregoing articles, other than
those of heading 9609
2.8.2016
EN
Official Journal of the European Union
L 208/41
9612
Typewriter or similar ribbons, inked or otherwise Manufacture:
prepared for giving impressions, whether or not — from materials of any heading, except that of
on spools or in cartridges; ink-pads, whether or
the product, and
not inked, with or without boxes
— in which the value of all the materials used does
not exceed 70 % of the ex-works price of the
product
9613 20
Pocket lighters, gas fuelled, refillable
9614
Smoking pipes (including pipe bowls) and cigar Manufacture from materials of any heading
or cigarette holders, and parts thereof
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Manufacture in which the total value of the mate
rials of heading 9613 used does not exceed 30 % of
the ex-works price of the product
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
For the special conditions relating to ‘specific processes’, see Introductory Note 7.2.
A ‘group’ is regarded as any part of the heading separated from the rest by a semi-colon.
In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within
headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight
in the product.
The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D
1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
See Introductory Note 6.
For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics
(cut out or knitted directly to shape), see Introductory Note 6.
SEMII — Semiconductor Equipment and Materials Institute Incorporated
قرار من مجلس الاتحاد الأوروبي بشأن موقف الاتحاد في لجنة الشراكة مع الأردن لتبسيط قواعد المنشأ، دعمًا لتشغيل اللاجئين السوريين في الأردن.
المعلومات الأساسية
تاريخ الصدور
البلد المستهدف
رقم الوثيقة
مصدر الوثيقة
المجموعات
نوع المصدر
نوع الوثيقة
العنوان الأصلي للوثيقة
اللغة
كود الذاكرة السورية
الجهة المصدرة
وثائق أخرى للجهة المصدرة
Declaration by the High Representative on behalf of the EU on the alignment of certain third countries concerning restrictive measures against Syria
نوع الوثيقة:
بيان صحفي
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/02/16
Syrian foreign affairs minister added to EU sanctions list
نوع الوثيقة:
قرار
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/01/15
New EU Special Representative for the Middle East Peace Process appointed
نوع الوثيقة:
بيان صحفي
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/04/29
Syria: Declaration by the High Representative on behalf of the European Union on the 10 years of the conflict
نوع الوثيقة:
بيان صحفي
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/03/14
Report by President Charles Michel to the European Parliament plenary session
نوع الوثيقة:
تقرير
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/04/26
Syria: Council extends sanctions against the regime for another year
نوع الوثيقة:
قرار
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/05/27
EU imposes restrictive measures against the Wagner Group
نوع الوثيقة:
قرار
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/12/13
Declaration by the High Representative on behalf of the European Union on the alignment of certain countries concerning restrictive measures against Syria
نوع الوثيقة:
بيان صحفي
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2022/01/12
Syria: four new ministers added to EU sanctions list
نوع الوثيقة:
قرار
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/11/15
Joint press release by the President of the European Council and the President of the European Commission following their video conference with President Erdoğan
نوع الوثيقة:
بيان صحفي
الجهة المصدرة:
المجلس الأوروبي
تاريخ الصدور:
2021/03/19
كيانات متعلقة
شخصيات مرتبطة
لايوجد معلومات حالية
يوميات مرتبطة
لايوجد معلومات حالية