Decision No 1/2018 of the EU-Jordan Association Committee of 4 December 2018 amending the provisions of Protocol 3 to the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept of ‘originating products’ and the list of working or processing required to be carried out on non-originating materials in order for certain categories of products, manufactured in the territory of the Hashemite Kingdom of Jordan, and connected with generating employment for Syrian refugees and Jordanians, to obtain originating status [2019/42]

11.1.2019

Official Journal of the European Union

L 9/147

DECISION No 1/2018 OF THE EU-JORDAN ASSOCIATION COMMITTEE

of 4 December 2018

amending the provisions of Protocol 3 to the Euro-Mediterranean Agreement establishing an

Association between the European Communities and their Member States, of the one part, and

the Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept

of ‘originating products’ and the list of working or processing required to be carried out on

non-originating materials in order for certain categories of products, manufactured in the territory

of the Hashemite Kingdom of Jordan, and connected with generating employment for Syrian

refugees and Jordanians, to obtain originating status [2019/42]

THE EU-JORDAN ASSOCIATION COMMITTEE,

Having regard to the Euro-Mediterranean Agreement establishing an Association between the European Communities

and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, (the ‘Agreement’),

and in particular Article 94 of the Agreement and Article 39 of Protocol 3 to the Agreement,

Whereas:

(1)

Since the entry into force of Decision No 1/2016 of the EU-Jordan Association Committee (1) until March 2018,

eleven companies registered to benefit from the relaxed rules of origin scheme.

(2)

Between January 2016 and October 2018, the Hashemite Kingdom of Jordan (‘Jordan’) issued over

120 000 work permits to Syrian refugees, of which approximately 42 000 were active work permits during the

third quarter of 2018.

(3)

In December 2017, Jordan presented the first annual report on the implementation of Decision No 1/2016,

concerning the definition of the concept of ‘originating products’ and the list of working or processing required

to be carried out on non-originating materials in order for certain categories of products, manufactured in the

territory of Jordan, and connected with generating employment for Syrian refugees and Jordanians, to obtain

originating status.

(4)

Following the findings of the report, Jordan made a request to review Decision No 1/2016 and to introduce

additional flexibilities. The Union considered that certain improvements of the scheme shall further contribute to

a higher employment of Syrian refugees, as well as of Jordanians.

(5)

The further revision or requirements applicable to economic operators that wish to benefit from the rules of

origin scheme would be subject to certain conditions with a view to ensuring that the benefits go hand in hand

with the Jordanian efforts of employing Syrian refugees.

(6)

The Annex to this Decision applies to goods produced in production facilities located in Jordan and aims at

contributing to the generation of employment for Syrian refugees and for the Jordanian population.

(7)

The objective of this amendment is to improve the original initiative in order to improve the effects of the

scheme on the Jordanian economy and to contribute to increasing the number of Syrian refugees legally

employed in Jordan, as well as Jordanians.

(8)

There should be a possibility of temporarily suspending the application of the Annex to this Decision, if the

conditions set out in Article 1(1), (2) and (3) of the Annex to this Decision are not met.

(9)

There should also be a possibility of temporarily suspending the application of the Annex to this Decision with

respect to any of the products listed in Article 2 of the Annex to this Decision imported in such increased

quantities and under such conditions as to cause, or threaten to cause, serious injuries to Union producers of like

or directly competing products in all or part of the territory of the Union or serious disturbances in any sector of

the economy of the Union, in accordance with Articles 24 and 26 of the Agreement.

(1) Decision No 1/2016 of the EU-Jordan Association Committee of 19 July 2016 amending the provisions of Protocol 3 to the Euro-Medi

terranean Agreement establishing an Association ‘between the European Communities and their Member States, of the one part, and the

Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept of originating products’ and the list of working

or processing required to be carried out on non-originating materials in order for certain categories of products, manufactured in

dedicated development zones and industrial areas, and connected with generating employment for Syrian refugees and Jordanians, to

obtain originating status [2016/1436] (OJ L 233, 30.8.2016, p. 6).

L 9/148

Official Journal of the European Union

11.1.2019

(10)

This Decision should be valid for a limited period sufficient to provide an incentive for additional investment and

employment generation and should therefore expire on 31 December 2030.

(11)

The achievement by Jordan of its objective of creating at least 60 000 legal and active job opportunities, in

particular corresponding to active work permits or other measurable means corresponding to legal and active

employment determined by the Association Committee, for Syrian refugees would also represent a significant

milestone. Accordingly, when this objective is achieved, the Union and Jordan should, also taking into account

the modernisation of the Regional Convention on pan-Euro-Mediterranean Preferential Rules of Origin, extend

the coverage of this Decision to include all production in Jordan of products covered by this Decision without

the need to satisfy the specific conditions set out in Article 1(1)(b) of the Annex to this Decision.

(12)

If the objective of creating at least 60 000 legal and active job opportunities, in particular corresponding to

active work permits or other measurable means corresponding to legal and active employment determined by the

Association Committee, for Syrian refugees is not achieved, the specific conditions set out in Article 1(1)(b) of

the Annex to this Decision should apply.

(13)

Jordan will develop a clear and stable legal framework for decent employment of Syrian refugees. Specifically,

Jordan will continue to expand the sectors and occupations open to refugees, mainly at technical level, with

a particular focus on women's participation. In implementing the National Empowerment and Employment

Programme (NEEP) and in calculating the participation of non-Jordanians working across multiple sectors, Jordan

will exempt refugees from possible reductions in the percentage of non-Jordanians. Jordan will also ensure that

the cost of obtaining the right to work for Syrian refugees is permanently waived.

(14)

Jordan will, with assistance from the EU where appropriate, ensure a clear framework for the set-up of joint

ventures between Jordanians and third-country nationals, including Syrian refugees, focusing particularly on

women, ensuring that the rights of both parties are upheld, that ownership is clarified and that access to finance

is facilitated.

(15)

Jordan will take necessary steps towards facilitating investment and improving the overall business climate. To

that end, Jordan will adopt and implement an action plan in close consultation with the European Union. In

particular, Jordan will create stronger synergies between public sector entities, the private sector and donors, in

an effort to improve the business environment and attract investment. To complement this action, the internat

ional community will provide firm-level assistance and programmes, aimed at increasing the export capability of

Jordanian firms in sectors where the country has a competitive advantage in the global market.

(16)

Jordan will ensure regulatory predictability, with the aim of reducing red tape and costs for investors. This

includes the development of incentives for business formalisation, streamlining the process for company

registration, adopting a stable legal infrastructure for insolvency, corporate taxation, bank lending, as well as

developing non-bank financial institutions, and reducing the administrative burden for companies requiring an

export license.

(17)

Jordan will organise a Business and Investors' Conference in Jordan in due time to showcase the reformed scheme

that was initially supposed to take place in autumn 2017 in Jordan.

(18)

Jordan supports the modernisation of the Regional Convention on pan-Euro-Mediterranean Preferential Rules of

Origin with the aim of improving market access conditions for Jordanian exports in the European Union and to

expand regional trade and economic integration,

HAS ADOPTED THIS DECISION:

Article 1

Annex II(a) to Protocol 3 to the Agreement, containing the conditions for application and the list of working or

processing required to be carried out on non-originating materials in order for the product manufactured in Jordan

connected with the additional employment of Syrian refugees to obtain originating status, is hereby replaced by a new

version of Annex II(a) to Protocol 3 to the Agreement, contained in the Annex to this Decision.

Annex II(a) to Protocol 3 to the Agreement shall apply until 31 December 2030.

11.1.2019

Official Journal of the European Union

L 9/149

Article 2

The Annex shall form an integral part of this Decision.

Article 3

This Decision shall enter into force on the date of its adoption by the Association Committee.

Done at Amman, 4 December 2018.

For the EU-Jordan Association Committee

The President

Yousef AL SHAMALI

L 9/150

Official Journal of the European Union

11.1.2019

ANNEX

‘ANNEX II(a)

ADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON

NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING

STATUS

Article 1

Common provisions

Definition of origin

For the products listed in Article 2, the following rules may also apply instead of the rules set out in Annex II of

Protocol 3 provided that such products respect the following conditions:

(a) the required working or processing to be carried out on non-originating materials in order for such products

to obtain originating status takes place in production facilities located in the territory of Jordan; and

(b) the total work force of each production facility located in the territory of Jordan where such products are

worked or processed contains a proportion of Syrian refugees equivalent to at least 15 % (calculated

individually for each production facility).

The relevant proportion pursuant to subparagraph 1(b) shall be calculated at any point after the entry into force

of this Annex and on an annual basis thereafter taking into account the number of Syrian refugees who are

employed in formal and decent jobs and on a Full-Time Equivalent basis, and who have received a work permit

valid for a minimum period of 12 months under the applicable legislation of Jordan.

The competent authorities of Jordan shall monitor that the eligible production facilities comply with the

conditions set out in paragraph 1, shall grant to production facilities fulfilling such conditions an authorisation

number and shall promptly withdraw such authorisation number where the production facilities no longer fulfil

such conditions.

Proof of origin

A proof of origin made out pursuant to this Annex shall contain the following statement in English: ‘Derogation

— Annex II(a) of Protocol 3 — authorisation number granted by the competent authorities of Jordan’.

Administrative cooperation

When, in accordance with Article 33(5) of this Protocol, as amended by Decision No 1/2006 of the EU-Jordan

Association Council (1), the customs authorities of Jordan inform the European Commission or the requesting

customs authorities of the Member States of the European Union (the ‘Member States’) of the results of the

verification, they shall specify that the products listed in Article 2 fulfil the conditions set out in paragraph 1.

Where the verification procedure or any other available information appears to indicate that the conditions set out

in paragraph 1 are not fulfilled, Jordan shall, on its own initiative or at the request of the European Commission

or the customs authorities of the Member States, carry out appropriate inquiries or arrange for such inquiries to

be carried out with due urgency to identify and prevent such violations. For that purpose, the European

Commission or the customs authorities of the Member States may participate in the inquiries.

Report, monitoring and review

Each year after the entry into force of this Annex, Jordan shall submit a report to the European Commission on

the operation and effects of this Annex, including production and export statistics at 8 digit level or the highest

level of detail available for the products covered by the scheme. Jordan shall also submit a list identifying the

production facilities in Jordan and specifying the percentage of Syrian refugees employed in each individual

production facility on a year-by-year basis. Jordan shall also report, on a quarterly basis, on the overall number of

active work permits or other measurable means corresponding to legal and active employment determined by

(1) Decision No 1/2006 of the EU-Jordan Association Council of 15 June 2006 amending Protocol 3 to the Euro-Mediterranean Agreement,

concerning the definition of the concept of originating products and methods of administrative cooperation (OJ L 209, 31.7.2006,

p. 30).

11.1.2019

Official Journal of the European Union

L 9/151

the Association Committee. The Parties shall jointly review such reports and any issues relating to the implemen

tation and monitoring of this Annex within the bodies established by the Association Agreement and in particular

in the Sub-Committee on Industry, Trade and Services. The Parties shall also ensure the involvement of relevant in

ternational organisations, such as the International Labour Organisation and the World Bank, in the monitoring

process.

Once Jordan achieves its target of facilitating a greater participation of Syrian refugees in the formal labour market

by issuing at least 60 000 active work permits, or other measurable means corresponding to legal and active

employment determined by the Association Committee, to Syrian refugees, the Parties shall apply the provisions

of this Annex to all products covered by this Annex without the requirement to comply with the specific

conditions set out in subparagraph 1(b).

If the Union considers that there is insufficient evidence of Jordan complying with the conditions set out in

paragraph 8, the Union may refer the matter to the Association Committee. If the Association Committee fails to

declare within 90 days of the referral of the matter that the conditions set out in paragraph 8 are met or to

amend this Annex, the Union may decide that the specific conditions set out in subparagraph 1(b) shall apply.

Temporary suspension

10.

(a) Without prejudice to paragraphs 8 and 9, the Union may, if it considers that there is insufficient evidence of

Jordan or any specific production facility complying with the conditions set out in paragraphs 1, 2 and 3, refer

the matter to the Association Committee. That referral shall identify whether the failure to comply with the

conditions set out in paragraph 1 is attributable to Jordan or any specific production facility.

(b) If the Association Committee fails to declare within 90 days of the referral of the matter that the conditions

set out in paragraph 1 are met or to amend this Annex, the application of this Annex shall be suspended. The

extent of the suspension shall be that identified in the referral of the Union to the Association Committee.

take effect where the Association Council has failed to take any of the actions identified in point (b) within the

extended period of time.

(d) The application of this Annex may resume if the Association Committee so decides.

(e) In case of a suspension, this Annex shall continue to apply for a period of four months in relation to products

which are, on the date of temporary suspension of the Annex, either in transit or in temporary storage in

customs warehouses or in free zones in the Union, and for which a proof of origin was properly made out in

accordance with the provisions of this Annex prior to the date of temporary suspension.

Safeguard mechanism

11.

Where a product listed in Article 2 benefiting from the application of this Annex is imported in such increased

quantities and under such conditions as to cause, or threaten to cause, serious injury to Union producers of like

or directly competitive products in all or part of the territory of the Union or serious disturbances in any sector of

the economy of the Union, in accordance with Articles 24 and 26 of the Agreement, the Union may refer the

matter for examination to the Association Committee. If within 90 days of the matter being referred to it, the

Association Committee fails to adopt a decision putting an end to such serious injury or threat thereof or serious

disturbances or if no other satisfactory solution has been reached, the application of this Annex shall be

suspended with respect to that product, until the Association Committee adopts a decision declaring that they

have ended or until a satisfactory solution has been reached by the Parties and is notified to the Association

Committee.

Entry into force and application

12.

This Annex shall apply from the day of entry into force of the Association Committee decision to which it is

attached and shall apply until 31 December 2030.

Article 2

List of products and of required working and processing

The list of products to which this Annex applies and the rules of working and processing that may be applied as an

alternative to those listed in Annex II are set out below.

L 9/152

Official Journal of the European Union

11.1.2019

Annex I to Protocol 3 of the Agreement containing the introductory notes to the list in Annex II to Protocol 3 of the

Agreement applies mutatis mutandis to the list below, subject to the following amendments:

In Note 5.2, the following basic materials are added in the second paragraph:

— glass fibres;

— metal fibres.

In Note 7.3, the text is replaced by the following:

For the purposes of headings ex 2707 and 2713, simple operations, such as cleaning, decanting, desalting, waterseparation, filtering, colouring, marking, obtaining a sulphur-content as a result of mixing products with different

sulphur-contents, or any combination of these operations or like operations, do not confer origin.

ex Chapter 25

Salt; sulphur; earths and stone; plastering materials, Manufacture from materials of any heading, except that

lime and cement; except for:

of the product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

ex 2519

Crushed natural magnesium carbonate (magnesite), in Manufacture from materials of any heading, except that

hermetically-sealed containers, and magnesium oxide, of the product. However, natural magnesium carbonate

whether or not pure, other than fused magnesia or (magnesite) may be used.

dead-burned (sintered) magnesia.

ex Chapter 27

Mineral fuels, mineral oils and products of their distilla Manufacture from materials of any heading, except that

tion; bituminous substances; mineral waxes, except for: of the product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

ex 2707

2710

2711

Oils in which the weight of the aromatic constituents

exceeds that of the non-aromatic constituents, being

oils similar to mineral oils obtained by distillation of

high temperature coal tar, of which more than 65 % by

volume distils at a temperature of up to 250 °C (includ

ing mixtures of petroleum spirit and benzole), for use

as power or heating fuels.

Operations of refining and/or one or more specific pro

cess(es) (1)

Petroleum oils and oils obtained from bituminous ma

terials, other than crude; preparations not elsewhere

specified or included, containing by weight 70 % or

more of petroleum oils or of oils obtained from bitu

minous materials, these oils being the basic constitu

ents of the preparations; waste oils.

Operations of refining and/or one or more specific pro

cess(es) (2)

Petroleum gases and other gaseous hydrocarbons.

other operations in which all the materials used are clas

sified within a heading other than that of the product.

However, materials of the same heading as the product

may be used, provided that their total value does not ex

ceed 50 % of the ex-works price of the product.

other operations in which all the materials used are clas

sified within a heading other than that of the product.

However, materials of the same heading as the product

may be used, provided that their total value does not ex

ceed 50 % of the ex-works price of the product.

Operations of refining and/or one or more specific pro

cess(es)

other operations in which all the materials used are clas

sified within a heading other than that of the product.

However, materials of the same heading as the product

may be used, provided that their total value does not ex

ceed 50 % of the ex-works price of the product.

11.1.2019

2712

Petroleum jelly; paraffin wax, microcrystalline petro

leum wax, slack wax, ozokerite, lignite wax, peat wax,

other mineral waxes, and similar products obtained by

synthesis or by other processes, whether or not co

loured.

2713

Official Journal of the European Union

L 9/153

Operations of refining and/or one or more specific pro

cess(es) (2)

other operations in which all the materials used are clas

sified within a heading other than that of the product.

However, materials of the same heading as the product

may be used, provided that their total value does not ex

ceed 50 % of the ex-works price of the product.

Petroleum coke, petroleum bitumen and other residues Operations of refining and/or one or more specific pro

of petroleum oils or of oils obtained from bituminous cess(es) (1)

materials.

other operations in which all the materials used are clas

sified within a heading other than that of the product.

However, materials of the same heading as the product

may be used, provided that their total value does not ex

ceed 50 % of the ex-works price of the product.

ex Chapter 28

Inorganic chemicals; organic or inorganic compounds Manufacture from materials of any heading, except that

of precious metals, of rare-earth metals, of radioactive of the product. However, materials of the same heading

as the product may be used, provided that their total

elements or of isotopes; except for:

value does not exceed 20 % of the ex-works price of the

product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

ex 2811

Sulphur trioxide; and

Manufacture from sulphur dioxide

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

ex 2840

Sodium perborate;

Manufacture from disodium tetraborate pentahydrate

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

2843

Colloidal precious metals; inorganic or organic com Manufacture from materials of any heading, including

pounds of precious metals, whether or not chemically other materials of heading 2843.

defined; amalgams of precious metals

ex 2852

– Mercury compounds of internal ethers and their hal Manufacture from materials of any heading. However,

ogenated, sulphonated, nitrated or nitrosated deriva the value of all the materials of heading 2909 used shall

not exceed 20 % of the ex-works price of the product

tives.

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

– Mercury compounds of nucleic acids and their salts, Manufacture from materials of any heading. However,

whether or not chemically defined; other heterocyc the value of all the materials of headings 2852, 2932,

2933 and 2934 used shall not exceed 20 % of the exlic compounds.

works price of the product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

L 9/154

Official Journal of the European Union

ex Chapter 29

Organic chemicals; except for:

11.1.2019

Manufacture from materials of any heading, except that

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

ex 2905

Metal alcoholates of alcohols of this heading and of Manufacture from materials of any heading, including

ethanol; except for:

other materials of heading 2905. However, metal alco

holates of this heading may be used, provided that their

total value does not exceed 20 % of the ex-works price

of the product

manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct.

2905 43;

Mannitol; D-glucitol (sorbitol); Glycerol

2905 44;

2905 45

Manufacture from materials of any sub-heading, except

that of the product. However, materials of the same subheading as the product may be used, provided that their

total value does not exceed 20 % of the ex-works price

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

2915

Saturated acyclic monocarboxylic acids and their anhy

drides, halides, peroxides and peroxyacids; their hal

ogenated, sulphonated, nitrated or nitrosated deriva

tives

Manufacture from materials of any heading. However,

the value of all the materials of headings 2915 and

2916 used shall not exceed 20 % of the ex-works price

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 2932

– Internal ethers and their halogenated, sulphonated, Manufacture from materials of any heading. However,

nitrated or nitrosated derivatives

the value of all the materials of heading 2909 used shall

not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

– Cyclic acetals and internal hemiacetals and their hal Manufacture from materials of any heading

ogenated, sulphonated, nitrated or nitrosated deriva or

tives

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

11.1.2019

Official Journal of the European Union

L 9/155

2933

Heterocyclic compounds with nitrogen hetero-atom(s) Manufacture from materials of any heading. However,

only

the value of all the materials of headings 2932 and

2933 used shall not exceed 20 % of the ex-works price

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

2934

Nucleic acids and their salts, whether or not chemically Manufacture from materials of any heading. However,

defined; other heterocyclic compounds

the value of all the materials of headings 2932, 2933

and 2934 used shall not exceed 20 % of the ex-works

price of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

Chapter 31

Fertilisers

Manufacture from materials of any heading, except that

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

Chapter 32

Tanning or dyeing extracts; tannins and their deriva Manufacture from materials of any heading, except that

tives; dyes, pigments and other colouring matter; paints of the product. However, materials of the same heading

as the product may be used, provided that their total

and varnishes; putty and other mastics; inks

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 33

Essential oils and resinoids; perfumery, cosmetic or toi Manufacture from materials of any heading, except that

let preparations; except for:

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3301

Essential oils (terpeneless or not), including concretes

and absolutes; resinoids; extracted oleoresins; concen

trates of essential oils in fats, in fixed oils, in waxes or

the like, obtained by enfleurage or maceration; terpenic

by-products of the deterpenation of essential oils; aque

ous distillates and aqueous solutions of essential oils.

Manufacture from materials of any heading, including

materials of a different ‘group’ (3) in this heading. How

ever, materials of the same group as the product may be

used, provided that their total value does not exceed

20 % of the ex-works price of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

L 9/156

Official Journal of the European Union

ex Chapter 34

Soap, organic surface-active agents, washing prepara

tions, lubricating preparations, artificial waxes, pre

pared waxes, polishing or scouring preparations, can

dles and similar articles, modelling pastes, ‘dental

waxes’ and dental preparations with a basis of plaster,

except for:

11.1.2019

Manufacture from materials of any heading, except that

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3404

Artificial waxes and prepared waxes:

Manufacture from materials of any heading

— With a basis of paraffin, petroleum waxes, waxes

obtained from bituminous minerals, slack wax or

scale wax

Chapter 35

Albuminoidal substances; modified starches; glues; en Manufacture from materials of any heading, except that

zymes

of the product, in which the value of all the materials

used does not exceed 70 % of the ex-works price of the

product

Chapter 37

Photographic or cinematographic goods

Manufacture from materials of any heading, except that

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 38

Miscellaneous chemical products; except for:

Manufacture from materials of any heading, except that

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 20 % of the ex-works price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3803

Refined tall oil

Refining of crude tall oil

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3805

Spirits of sulphate turpentine, purified

Purification by distillation or refining of raw spirits of

sulphate turpentine

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

3806 30

Ester gums

Manufacture from resin acids

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

11.1.2019

Official Journal of the European Union

ex 3807

Wood pitch (wood tar pitch)

L 9/157

Distillation of wood tar

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

3809 10

Finishing agents, dye carriers to accelerate the dyeing Manufacture in which the value of all the materials used

or fixing of dyestuffs and other products and prepara does not exceed 70 % of the ex-works price of the prod

tions (for example, dressings and mordants), of a kind uct

used in the textile, paper, leather or like industries, not

elsewhere specified or included: With a basis of amyla

ceous substances

3823

Industrial monocarboxylic fatty acids; acid oils from re Manufacture from materials of any heading, including

fining; industrial fatty alcohols

other materials of heading 3823

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

3824 60

Sorbitol other than that of sub-heading 2905 44

Manufacture from materials of any sub-heading, except

that of the product and except materials of sub-heading

2905 44. However, materials of the same sub-heading

as the product may be used, provided that their total

value does not exceed 20 % of the exworks price of the

product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 39

Plastics and articles thereof; except for:

Manufacture from materials of any heading, except that

of the product.

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3907

– Copolymer, made from polycarbonate and acryloni Manufacture from materials of any heading, except that

trile-butadiene-styrene copolymer (ABS)

of the product. However, materials of the same heading

as the product may be used, provided that their total

value does not exceed 50 % of the ex-works price of the

product (4)

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

– Polyester

Manufacture from materials of any heading, except that

of the product

Manufacture from polycarbonate of tetrabromo-(bisphe

nol A)

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

L 9/158

ex 3920

Ionomer sheet or film

Official Journal of the European Union

11.1.2019

Manufacture from a thermoplastic partial salt which is

a copolymer of ethylene and metacrylic acid partly neu

tralised with metal ions, mainly zinc and sodium

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 3921

Foils of plastic, metallised

Manufacture from highly-transparent polyester-foils with

a thickness of less than 23 micron (5)

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 40

Rubber and articles thereof; except for:

Manufacture from materials of any heading, except that

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

4012

Retreaded or used pneumatic tyres of rubber; solid or

cushion tyres, tyre treads and tyre flaps, of rubber:

– Retreaded pneumatic, solid or cushion tyres, of rub Retreading of used tyres

ber

– Other

Manufacture from materials of any heading, except those

of headings 4011 and 4012

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 41

Raw hides and skins (other than furskins) and leather; Manufacture from materials of any heading, except that

except for:

of the product

4101 to 4103

Raw hides and skins of bovine (including buffalo) or Manufacture from materials of any heading

equine animals (fresh, or salted, dried, limed, pickled or

otherwise preserved, but not tanned, parchment

dressed or further prepared), whether or not dehaired

or split; raw skins of sheep or lambs (fresh, or salted,

dried, limed, pickled or otherwise preserved, but not

tanned, parchment dressed or further prepared),

whether or not with wool on or split, other than those

excluded by note 1(c) to Chapter 41; other raw hides

and skins (fresh, or salted, dried, limed, pickled or

otherwise preserved, but not tanned, parchment

dressed or further prepared), whether or not dehaired

or split, other than those excluded by note 1(b) or 1(c)

to Chapter 41

11.1.2019

Official Journal of the European Union

L 9/159

4104 to 4106

Tanned or crust hides and skins, without wool or hair Re-tanning of tanned or pre-tanned hides and skins of

on, whether or not split, but not further prepared

sub-headings 4104 11, 4104 19, 4105 10, 4106 21,

4106 31 or 4106 91,

Manufacture from materials of any heading, except that

of the product

4107, 4112,

4113

Leather further prepared after tanning or crusting

Manufacture from materials of any heading, except that

of the product. However, materials of sub-headings

4104 41, 4104 49, 4105 30, 4106 22, 4106 32 and

4106 92 may be used only if a re-tanning operation of

the tanned or crust hides and skins in the dry state takes

place

Chapter 42

Articles of leather; saddlery and harness; travel goods, Manufacture from materials of any heading, except that

handbags and similar containers; articles of animal gut of the product

(other than silk worm gut)

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex Chapter 43

Furskins and artificial fur; manufactures thereof; except Manufacture from materials of any heading, except that

for:

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

4301

Raw furskins (including heads, tails, paws and other Manufacture from materials of any heading

pieces or cuttings, suitable for furrier's use), other than

raw hides and skins of heading 4101, 4102 or 4103

ex 4302

Tanned or dressed furskins, assembled:

– Plates, crosses and similar forms

Bleaching or dyeing, in addition to cutting and assembly

of non-assembled tanned or dressed furskins

– Other

Manufacture from non-assembled, tanned or dressed fur

skins

4303

Articles of apparel, clothing accessories and other arti Manufacture from non-assembled tanned or dressed fur

cles of furskin

skins of heading 4302

ex Chapter 44

Wood and articles of wood; wood charcoal; except for: Manufacture from materials of any heading, except that

of the product

Manufacture in which the value of all the materials used

does not exceed 70 % of the ex-works price of the prod

uct

ex 4407

Wood sawn or chipped lengthwise, sliced or peeled, of Planing, sanding or end-jointing

a thickness exceeding 6 mm, planed, sanded or endjointed

L 9/160

Official Journal of the European Union

11.1.2019

ex 4408

Sheets for veneering (including those obtained by sli Splicing, planing, sanding or endjointing

cing laminated wood) and for plywood, of a thickness

not exceeding 6 mm, spliced, and other wood sawn

lengthwise, sliced or peeled of a thickness not exceed

ing 6 mm, planed, sanded or end-jointed

ex 4410 to

ex 4413

Beadings and mouldings, including moulded skirting Beading or moulding

and other moulded boards

ex 4415

Packing cases, boxes, crates, drums and similar pack Manufacture from boards not cut to size

ings, of wood

ex 4418

– Builders' joinery and carpentry of wood

Manufacture from materials of any heading, except that

of the product. However, cellular wood panels, shingles

and shakes may be used

– Beadings and mouldings

Beading or moulding

ex 4421

Match splints; wooden pegs or pins for footwear

Manufacture from wood of any heading, except drawn

wood of heading 4409

ex Chapter 51

Wool, fine or coarse animal hair; horsehair yarn and Manufacture from materials of any heading, except that

woven fabric; except for:

of the product

5106 to 5110

Yarn of wool, of fine or coarse animal hair or of horse Spinning of natural fibres or extrusion of man-made fi

hair

bres accompanied by spinning (6)

5111 to 5113

Woven fabrics of wool, of fine or coarse animal hair or Weaving (6)

of horsehair:

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

ex Chapter 52

Cotton; except for:

Manufacture from materials of any heading, except that

of the product

5204 to 5207

Yarn and thread of cotton

Spinning of natural fibres or extrusion of man-made fi

bres accompanied by spinning (6)

5208 to 5212

Woven fabrics of cotton:

Weaving (6)

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

11.1.2019

Official Journal of the European Union

L 9/161

ex Chapter 53

Other vegetable textile fibres; paper yarn and woven Manufacture from materials of any heading, except that

fabrics of paper yarn; except for:

of the product

5306 to 5308

Yarn of other vegetable textile fibres; paper yarn

5309 to 5311

Woven fabrics of other vegetable textile fibres; woven Weaving (6)

fabrics of paper yarn:

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

5401 to 5406

Yarn, monofilament and thread of man-made filaments Extrusion of man-made fibres accompanied by spinning

or spinning of natural fibres (6)

5407 and 5408

Woven fabrics of man-made filament yarn:

Spinning of natural fibres or extrusion of man-made fi

bres accompanied by spinning (6)

Weaving (6)

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

5501 to 5507

Man-made staple fibres

Extrusion of man-made fibres

5508 to 5511

Yarn and sewing thread of man-made staple fibres

Spinning of natural fibres or extrusion of man-made fi

bres accompanied by spinning (6)

5512 to 5516

Woven fabrics of man-made staple fibres:

Weaving (6)

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

ex Chapter 56

Wadding, felt and non-wovens; special yarns; twine, Extrusion of man-made fibres accompanied by spinning

cordage, ropes and cables and articles thereof; except or spinning of natural fibres

for:

Flocking accompanied by dyeing or printing (6)

5602

Felt, whether or not impregnated, coated, covered or

laminated:

– Needleloom felt

Extrusion of man-made fibres accompanied by fabric

formation,

However:

— polypropylene filament of heading 5402,

— polypropylene fibres of heading 5503 or 5506, or

— polypropylene filament tow of heading 5501,

L 9/162

Official Journal of the European Union

11.1.2019

of which the denomination in all cases of a single fila

ment or fibre is less than 9 decitex,

may be used, provided that their total value does not ex

ceed 40 % of the ex-works price of the product

Fabric formation alone in the case of felt made from

natural fibres (6)

– Other

Extrusion of man-made fibres accompanied by fabric

formation,

Fabric formation alone in the case of other felt made

from natural fibres (6)

5603

Non-wovens, whether or not impregnated, coated, cov Any non-woven process including needle punching

ered or laminated

5604

Rubber thread and cord, textile covered; textile yarn,

and strip and the like of heading 5404 or 5405, im

pregnated, coated, covered or sheathed with rubber or

plastics:

– Rubber thread and cord, textile covered

Manufacture from rubber thread or cord, not textile cov

ered

– Other

Extrusion of man-made fibres accompanied by spinning

or spinning of natural fibres (6)

5605

Metallised yarn, whether or not gimped, being textile Extrusion of man-made fibres accompanied by spinning

yarn, or strip or the like of heading 5404 or 5405, or spinning of natural and/or man-made staple fibres (6)

combined with metal in the form of thread, strip or

powder or covered with metal

5606

Gimped yarn, and strip and the like of heading 5404 Extrusion of man-made fibres accompanied by spinning

or 5405, gimped (other than those of heading 5605 or spinning of natural and/or man-made staple fibres

and gimped horsehair yarn); chenille yarn (including or

flock chenille yarn); loop wale-yarn

Spinning accompanied with flocking

Flocking accompanied by dyeing (6)

Chapter 57

Carpets and other textile floor coverings:

Spinning of natural and/or man-made staple fibres or

extrusion of man-made filament yarn, in each case

accompanied by weaving

Manufacture from coir yarn or sisal yarn or jute yarn

Flocking accompanied by dyeing or by printing

Tufting accompanied by dyeing or by printing

Extrusion of man-made fibres accompanied by nonwoven techniques including needle punching (6)

11.1.2019

Official Journal of the European Union

L 9/163

However:

— polypropylene filament of heading 5402,

— polypropylene fibres of heading 5503 or 5506, or

— polypropylene filament tow of heading 5501,

of which the denomination in all cases of a single fila

ment or fibre is less than 9 decitex, may be used, pro

vided that their total value does not exceed 40 % of the

ex-works price of the product

Jute fabric may be used as a backing

ex Chapter 58

Special woven fabrics; tufted textile fabrics; lace; tap Weaving (6)

estries; trimmings; embroidery; except for:

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendaring, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling) where the value of the un

printed fabric used does not exceed 47,5 % of the exworks price of the product

5805

Hand-woven tapestries of the types Gobelins, Flanders, Manufacture from materials of any heading, except that

Aubusson, Beauvais and the like, and needle-worked of the product

tapestries (for example, petit point, cross stitch),

whether or not made up

5810

Embroidery in the piece, in strips or in motifs

Manufacture in which the value of all the materials used

does not exceed 50 % of the ex-works price of the prod

uct

5901

Textile fabrics coated with gum or amylaceous sub

stances, of a kind used for the outer covers of books or

the like; tracing cloth; prepared painting canvas; buck

ram and similar stiffened textile fabrics of a kind used

for hat foundations

Weaving accompanied by dyeing or by flocking or by

coating

5902

Flocking accompanied by dyeing or printing

Tyre cord fabric of high tenacity yarn of nylon or other

polyamides, polyesters or viscose rayon:

– Containing not more than 90 % by weight of textile Weaving

materials

– Other

5903

Extrusion of man-made fibres accompanied by weaving

Textile fabrics impregnated, coated, covered or lami Weaving accompanied by dyeing or by coating

nated with plastics, other than those of heading 5902

L 9/164

Official Journal of the European Union

11.1.2019

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendering, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling), provided that the value of

the unprinted fabric used does not exceed 47,5 % of the

ex-works price of the product

5904

Linoleum, whether or not cut to shape; floor coverings Weaving accompanied by dyeing or by coating (6)

consisting of a coating or covering applied on a textile

backing, whether or not cut to shape

5905

Textile wall coverings:

– Impregnated, coated, covered or laminated with rub Weaving accompanied by dyeing or by coating

ber, plastics or other materials

– Other

Spinning of natural and/or man-made staple fibres or

extrusion of man-made filament yarn, in each case

accompanied by weaving

Weaving accompanied by dyeing or by coating

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendering, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling), provided that the value of

the unprinted fabric used does not exceed 47,5 % of the

ex-works price of the product (6):

5906

Rubberised textile fabrics, other than those of heading

5902:

– Knitted or crocheted fabrics

Spinning of natural and/or man-made staple fibres or

extrusion of man-made filament yarn, in each case

accompanied by knitting

Knitting accompanied by dyeing or by coating

Dyeing of yarn of natural fibres accompanied by knit

ting (6)

– Other fabrics made of synthetic filament yarn, con Extrusion of man-made fibres accompanied by weaving

taining more than 90 % by weight of textile mate

rials

– Other

Weaving accompanied by dyeing or by coating

Dyeing of yarn of natural fibres accompanied by weav

ing

5907

Textile fabrics otherwise impregnated, coated or cov Weaving accompanied by dyeing or by flocking or by

ered; painted canvas being theatrical scenery, studio coating

back-cloths or the like

Flocking accompanied by dyeing or by printing

11.1.2019

Official Journal of the European Union

L 9/165

Printing accompanied by at least two preparatory or fin

ishing operations (such as scouring, bleaching, mercer

ising, heat setting, raising, calendering, shrink resistance

processing, permanent finishing, decatising, impregnat

ing, mending and burling), provided that the value of

the unprinted fabric used does not exceed 47,5 % of the

ex-works price of the product

5908

5909 to 5911

Textile wicks, woven, plaited or knitted, for lamps,

stoves, lighters, candles or the like; incandescent gas

mantles and tubular knitted gas mantle fabric therefor,

whether or not impregnated:

– Incandescent gas mantles, impregnated

Manufacture from tubular knitted gas-mantle fabric

– Other

Manufacture from materials of any heading, except that

of the product

Textile articles of a kind suitable for industrial use:

– Polishing discs or rings other than of felt of heading Weaving

5911

– Woven fabrics, of a kind commonly used in paper Weaving (6)

making or other technical uses, felted or not,

whether or not impregnated or coated, tubular or

endless with single or multiple warp and/or weft, or

flat woven with multiple warp and/or weft of head

ing 5911

– Other

Extrusion of man-made filament yarn or spinning of

natural or man-made staple fibres, accompanied by

weaving (6)

Weaving accompanied by dyeing or coating

Chapter 60

Knitted or crocheted fabrics

Spinning of natural and/or man-made staple fibres or

extrusion of man-made filament yarn, in each case

accompanied by knitting

Knitting accompanied by dyeing or by flocking or by

coating

Flocking accompanied by dyeing or by printing

Dyeing of yarn of natural fibres accompanied by knit

ting

Twisting or texturing accompanied by knitting provided

that the value of the non-twisted/non-textured yarns

used does not exceed 47,5 % of the ex-works price of

the product

L 9/166

Official Journal of the European Union

Chapter 61

Articles of apparel and clothing accessories, knitted or

crocheted:

11.1.2019

– Obtained by sewing together or otherwise assemb Manufacture from fabric

ling, two or more pieces of knitted or crocheted fab

ric which have been either cut to form or obtained

directly to form

– Other

Spinning of natural and/or man-made staple fibres or

extrusion of man-made filament yarn, in each case

accompanied by knitting (knitted to shape products)

Dyeing of yarn of natural fibres accompanied by knit

ting (knitted to shape products) (6)

ex Chapter 62

Articles of apparel and clothing accessories, not knitted Manufacture from fabric

or crocheted; except for:

6213 and 6214

Handkerchiefs, shawls, scarves, mufflers, mantillas, veils

and the like:

– Embroidered

Weaving accompanied by making-up (including cutting)

Manufacture from unembroidered fabric, provided that

the value of the unembroidered fabric used does not ex

ceed 40 % of the ex-works price of the product (7)

Making-up preceded by printing accompanied by at least

two preparatory or finishing operations (such as scour

ing, bleaching, mercerising, heat setting, raising, calen

dering, shrink resistance processing, permanent finish

ing, decatising, impregnating, mending and burling),

provided that the value of the unprinted fabric used

does not exceed 47,5 % of the ex-works price of the

product (6) (7)

– Other

Weaving accompanied by making-up (including cutting)

Making-up followed by printing accompanied by at least

two preparatory finishing operations (such as scouring,

bleaching, mercerising, heat setting, raising, calendering,

shrink resistance processing, permanent finishing, deca

tising, impregnating, mending and burling), provided

that the value of the unprinted fabric used does not ex

ceed 47,5 % of the ex-works price of the product (6) (7)

6217

Other made up clothing accessories; parts of garments

or of clothing accessories, other than those of heading

6212:

– Embroidered

Weaving accompanied by making-up (including cutting)

Manufacture from unembroidered fabric, provided that

the value of the unembroidered fabric used does not ex

ceed 40 % of the ex-works price of the product (7)

11.1.2019

Official Journal of the European Union

L 9/167

– Fire-resistant equipment of fabric covered with foil Weaving accompanied by making-up (including cutting)

of aluminised polyester

Coating provided that the value of the uncoated fabric

used does not exceed 40 % of the ex-works price of

the product accompanied by making-up (including

cutting) (7)

– Interlinings for collars and cuffs, cut out

Manufacture from materials of any heading, except that

of the product, and in which the value of all the mate

rials used does not exceed 40 % of the ex-works price of

the product

ex Chapter 63

Other made-up textile articles; sets; worn clothing and Manufacture from materials of any heading, except that

worn textile articles; rags; except for:

of the product

6301 to 6304

Blankets, travelling rugs, bed linen etc.; curtains etc.;

المعلومات الأساسية

تاريخ الصدور

2018/12/04

البلد المستهدف

سوريةالأردن

رقم الوثيقة

CELEX 22019D0042

مصدر الوثيقة

EUR-Lex — مجلس الاتحاد الأوروبي

المجموعات

الاتحاد الأوربي

نوع المصدر

مصدر أصلي

نوع الوثيقة

قرار

العنوان الأصلي للوثيقة

Decision No 1/2018 of the EU-Jordan Association Committee of 4 December 2018 amending the provisions of Protocol 3 to the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept of ‘originating products’ and the list of working or processing required to be carried out on non-originating materials in order for certain categories of products, manufactured in the territory of the Hashemite Kingdom of Jordan, and connected with generating employment for Syrian refugees and Jordanians, to obtain originating status [2019/42]

اللغة

الإنجليزية

كود الذاكرة السورية

SMI/A200/996041

الجهة المصدرة

المجلس الأوروبي

وثائق أخرى للجهة المصدرة

Declaration by the High Representative on behalf of the EU on the alignment of certain third countries concerning restrictive measures against Syria

نوع الوثيقة:

بيان صحفي

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/02/16

Syrian foreign affairs minister added to EU sanctions list

نوع الوثيقة:

قرار

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/01/15

New EU Special Representative for the Middle East Peace Process appointed

نوع الوثيقة:

بيان صحفي

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/04/29

Syria: Declaration by the High Representative on behalf of the European Union on the 10 years of the conflict

نوع الوثيقة:

بيان صحفي

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/03/14

Report by President Charles Michel to the European Parliament plenary session

نوع الوثيقة:

تقرير

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/04/26

Syria: Council extends sanctions against the regime for another year

نوع الوثيقة:

قرار

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/05/27

EU imposes restrictive measures against the Wagner Group

نوع الوثيقة:

قرار

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/12/13

Declaration by the High Representative on behalf of the European Union on the alignment of certain countries concerning restrictive measures against Syria

نوع الوثيقة:

بيان صحفي

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2022/01/12

Syria: four new ministers added to EU sanctions list

نوع الوثيقة:

قرار

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/11/15

Joint press release by the President of the European Council and the President of the European Commission following their video conference with President Erdoğan

نوع الوثيقة:

بيان صحفي

الجهة المصدرة:

المجلس الأوروبي

تاريخ الصدور:

2021/03/19